Auto Zone Type & Area; Deleting Devices - Texecom Premier Elite 8XP-W Installation Manual

Premier Elite 8XP-W & 32XP-W Installation Manual
IMPORTANT
In all cases when entering the Learn menu the next available free Zone will be chosen to learn a device too. It
will not be possible to learn a device to a Zone that already has a device learned too it. The number of
expander's on the system will dictate which next "free" zone is chosen to learn too.
When all device slots have been used the following screen will be shown
All Devices
Learnt!
Pressing the
/
enter the Delete devices menu.
Auto Zone Type & Area
When learning devices, if no editing has taken place of the control panel onboard hardwired zones, these will
be switched to Not Used after the first Ricochet
be used for Ricochet ®
Zone
001-008
009
010
011 & above
IMPORTANT
If any editing of any of the on board control panel zones is carried out BEFORE any Ricochet devices are
learned too the system, the control panel zones will remain at factory defaults.

Deleting Devices

Delete Devices
To delete devices from the system, access the Ricochet Learn menu. Any of the methods previously detailed
may be used.
The key is used to access the Delete option.
/
Follow the flow diagram to delete devices from the system.
YES to Select:-
Learn Ricochet
 / y
Learn Device
Zone ???
/
Delete Device?
Zone ???
/
 y 
If all devices are deleted from the system the following will be shown
INS467-6
key will return you to the Ricochet
devices learned to the system.
The

between the Lea rn or Delete
N?,E?
U s e the
s elect different zones . It is only
N?,E? pos s ible to s elec t Zones which
have devices lea rned.
/ 
® learn menu; pressing the
® device is learned to the system; the following defaults will
Type
Not Used
Entry/Exit 1
Guard Access
Guard
/
key will cyc le

options .
/ or to
n n U
key will
/
Area
N/A
A
A
A
11