LACP Commands
show lacp
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
—
•
detail
(Optional) Displays detailed information.
Command Mode
Privileged EXEC Mode
User Guidelines
You can enter any show lacp command to display the active channel-group
information.
To show information for a specific channel, enter the show lacp command with a
channel-group number. If you do not specify a channel group, information for all
channel groups appears.
channel-group-number
You can enter the
keywords except sys-id.
Examples
—
Example 1
The following example shows the LACP statistics:
switchxxxxxx# show lacp counters
LACPDUs
Port
Sent
Recv
---------------------------------------
Channel group 1
fa1
5
3
fa2
8
0
Channel group 2
fa3
3
5
fa4
0
0
The following table describes the significant fields shown in the example:
Field
Port
LACPDUs Sent and
Recv
LACPDUs Pkts and Err
—
Example 2
The following example shows the LACP internal information:
option to specify a channel group for all
LACPDUs
Pkts Err
0
0
0
0
Description
Port identifier.
Number of LACP packets sent and received by a port.
Number of unknown and illegal packets received by
LACP for a port.
20
306