Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. Contents Page Page Dear SHARP customer ........
• The LCD panel used in this product is made of glass. Therefore, it can break when the product is struck forcefully or with a sharp object. If the LCD panel is broken, be careful not to be injured by broken glass.
Attaching the stand cover. Attaching the stand unit 1 Insert the stand cover. 2 Insert and tighten four short screws into the holes • Before performing work, spread cushioning over the of the stand cover. surface on which you will be laying the TV. This will prevent it from being damaged.
Setting the TV Connecting the antenna cable To enjoy a clearer picture, use an outdoor antenna. VHF/UHF antenna 75-ohm impedance 300-ohm twin- converter VHF/UHF lead fl at feeder (not supplied) antenna (not supplied) 75-ohm coaxial cable (round cable) (not supplied) To antenna terminal Standard DIN45325 plug (IEC 169-2)
Connecting external devices You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD player, Digital TV STB (Set Top Box) and PC. To view external source images, select the input source from INPUT on the remote control unit or INPUT on the TV.
Remote control unit SLEEP Set the Sleep timer. 0 hr. 30 min. 1 hr. 00 min. 1 hr. 30 min. 2 hr. 30 min. 2 hr. 00 min. AV MODE Select an audio and video setting. (See page 10.) Select the sound multiplex mode. e (Mute) Press e s Mutes sound.
Part names TV (Front) POWER MENU INPUT VOL + /− POWER SLEEP Remote control POWER SLEEP timer OPC sensor sensor indicator indicator indicator POWER indicator Light off Power off. Lighted (Red) The TV is in standby mode. Lighted (Green) The TV is on.
Programme setup Initial auto installation When the TV powers on for the first time after Auto search purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings You can also automatically search by performing one after another. the procedure below.
Move it to the desired position by pressing Programme setup (Continued) a / b / c / d , and then press ENTER. Repeat the steps 4 and 5 until all desired • 179.25 MHz: Press 1 s 7 s 9 s 2 s 5. channels are sorted.
H Advanced Menu operation Colour temp. (Colour temperature) Adjusts the colour temperature to give the best white Press MENU and the MENU screen displays. image. Press c / d to select the desired menu. (Picture, Selected item Description Audio, ECO, Setup, Option) High White with bluish tone Mid-High...
Audio menu ECO menu Audio Setup Setup Option [ Disable ] STANDARD No signal off –15 Power management Treble [ Disable ] –15 No operation off Bass Balance Ecology [ Off ] SRS TS HD [ On ] Bass enhancer Reset H No signal off You can set the TV to automatically power off in...
H Input label Setup menu You can assign each input source a label as you prefer. Setup Option Press INPUT to select the desired input source. Auto installation Programme setup Press MENU and the MENU screen displays. Child lock Press c / d to select “Setup”. Input skip Input label Press a / b to select “Input label”, and then...
NOTE Setup menu (Continued) • When connecting devices (including a PC) with digital audio signal by using HDMI-certifi ed cable to HDMI 1 H Quick start terminal, you must set to “PC”. If “HDMI1” is set, there will You can reduce the TV’s start-up time after turning be no sound output.
NOTE Option menu (Continued) • For resetting all adjustment items to the factory preset values, press a / b to select “Reset”, press ENTER, press H Game play time c / d to select “Yes”, and then press ENTER. This function displays the elapsed game time so you •...
Each time you press m , the screen switches Wide Mode (Continued) as shown below. Manual Selection TELETEXT TELETEXT You can select different picture sizes that account for the kind of each picture. NOTE Press WIDE. • If you select a programme with no Teletext signal, “No •...
PC Control of the TV Communication procedure • When a programme is set, the TV can be Send the control commands from the PC via the controlled from the PC using the RS-232C RS-232C connector. terminal. The TV operates according to the received The input signal (PC/video) can be selected, command and sends a response message to the the volume can be adjusted and various other...
RS-232C commands list Commands • Commands not indicated here are not guaranteed to operate. CONTROL CONTROL CONTROL CONTROL COMMAND PARAMETER COMMAND PARAMETER ITEM CONTENTS ITEM CONTENTS POWER POWER OFF TOGGLE SETTING (STANDBY) (AV /PC) INPUT NORMAL (AV) SWITCHING ZOOM 14:9 (AV) (TOGGLE) INPUT PANORAMA (AV)
H Movie mode USB media player Press c/d to select “Movie mode”, and then H Connecting a USB device press ENTER. Connect a USB device to the TV as shown below. Press a/b to select the desired folder or directory, and then press ENTER. Press a/b to select the desired video.
H Photo mode USB media player (Continued) Viewing thumbnails H Music mode Select photo 1/1 Page Select music 1 / 1 Page Time File name USB g220\Audio\mp3 \USB g220\Audio\mp3 3:05 SONG_01.MP3 3:15 SONG_02.MP3 SONG_03.MP3 3:02 SONG_04.MP3 6:05 SONG_05.MP3 4:52 SONG_06.MP3 9:25 SONG_07.MP3 3:13...
Page 23
USB media player (Continued) H DivX® setup This is the function to confi rm your registration code. Press MENU and the MENU screen displays. Press c/d to select “Option”. Press a/b to select “DivX(R) Reg. Code”, and then press ENTER. •...
Appendix Troubleshooting The problems described below are not always caused by malfunctions. Check the TV again before having the TV serviced. Problem Possible Solution • No power. • Check if you pressed POWER on the remote control unit. (See pages 7 and 8.) If the indicator on the TV lights up red, press POWER.
* The HDMI1 and PC terminals can both use the same audio input terminal. • As a part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for product improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of production units.
TV. • This TV should be mounted on a wall only with the wall mount bracket available from SHARP (See page 23). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
Page 28
Được in tại Malaysia Printed in Malaysia TINS-F662WJZZ 12P11-MA-NF...