Faults Causes And Remedies - Soehnle 7730 User Manual

3. 3. 3. 3. FAULTS FAULTS – – – – CAUSES AND REMEDIES CAUSES AND REMEDIES
FAULTS FAULTS CAUSES AND REMEDIES CAUSES AND REMEDIES
DISPLAY DISPLAY
DISPLAY DISPLAY
If the fault cannot be cleared, or other error messages appear, please contact your service
partner.
www.soehnle-professional.com
CAUSES CAUSES
CAUSES CAUSES
The scale is not reset to »0.0 kg« when
switched on.
Underload: only dashes appear at the bottom
of the display field.
Overload: only dashes appear at the top of
the display field. Maximum weighing range is
exceeded.
The weighing value does not stabilise.
The weighing value does not stabilise.
Height rod is not in reference position during
power-up
The rechargeable battery is empty.
REMEDY REMEDY
REMEDY REMEDY
Unload the scale and restart the
display unit. If the error remains,
please contact your service partner.
Switch the display off and on again,
or pull out the mains plug. If the error
occurs again, please contact your
service partner.
Unload the scale, or switch them off
and on again. Check the maximum
weighing range.
Check the surface under the scale,
and check that the weighing platform
is level. If the error persists after
readjustment, please contact your
service partner.
Stand still or stabilise the weight on
the scale or restart the scale.
Fold up the height rod during power-
up.
Charge the battery.
19