Installation; Free-Standing (G 8050); Integrated ("I") Dishwashers (G 8051) - Miele G 8050 Operating Instructions Manual

Installation

Please refer to the installation
diagram supplied with the machine.
,
Furniture and fittings installed
near the machine must be of a
commercial standard able to
withstand the effects of steam and
condensation.
The machine must be installed correctly
and levelled.
Any unevenness in the floor level can
be compensated for and the height of
the machine raised or lowered by
adjusting the four screw feet.
The G 8050 machine is available in two
installation versions:

Free-standing (G 8050)

^ Install free-standing or
^ Slot-in or at the end of a row:
The machine can be installed next to
other machines or furniture, or in a
suitable niche. The niche must be at
least 60 cm wide and 60 cm deep.
58

Integrated ("i") dishwashers (G 8051)

(not available as GB electrical
specification)
"i" dishwashers are specially designed
for building under a continuous
worktop.
– The accessories are included with "i"
dishwashers in a separate package
for on-site fixing.
– The front of the dishwasher is
designed to take a front panel. It can
be fitted with a furniture door front to
match the rest of the kitchen.
– The dishwasher does not have a
plinth facing. The plinth area of the
dishwasher needs to be covered
either with a plinth facing to match
the kitchen furniture or with one
which can be ordered as a special
accessory. The separate plinth
facing can be height adjusted to suit
the kitchen. The plinth return is freely
adjustable.
Please refer to the separate installation
instructions supplied with "i"
dishwashers.