Programming The Amount Of Hot Water Using The Hot Water Sensor; Programming The Amount Via "Settings - Miele CVA 5060 Operating Instructions Manual

Programming the amount: setting the portion sizes
Programming the amount of hot water using the hot water
sensor

Programming the amount via "Settings"

52
^ Place the appropriate cup for the drink you want to
programme under the hot water spout.
^ Touch the Hot water sensor until "Prog. the amount"
appears in the display.
^ When sufficient water has flowed into the cup touch the Hot
water sensor again. "Save" will then appear in the display.
Each subsequent portion of hot water will then have the same
amount.
^ Select "Settings F" from the main menu and touch the OK
sensor.
Settings
Prog. the amount
Amount of coffee
^ Use the arrow sensors to highlight "Prog. the amount", and
then touch the OK sensor.
^ Select "Start" and touch the OK sensor.
The procedure is now the same as for programming the
amount using the OK sensor or the Hot water sensor.