Miele CVA 5060 Operating And Installation Instructions
Built-in coffee machines
Hide thumbs
Also See for CVA 5060:
- Operating and installation manual (80 pages) ,
- Installation and maintenance manual (40 pages) ,
- User manual (80 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Miele CVA 5060
Summary of Contents for Miele CVA 5060
- Page 1 Operating and installation instructions Built-in coffee machines CVA 5060 CVA 5068 en - AU, NZ To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time.
-
Page 2: Table Of Contents
Contents Caring for the environment ......... . 5 Guide to the machine . - Page 3 Miele|home.........
- Page 4 Contents Cleaning and care ..........45 Overview .
-
Page 5: Caring For The Environment
Caring for the environment Disposal of the packing Disposal of your old appliance material or machine The transport and protective packing Electrical and electronic appliances / has been selected from materials which machines often contain materials are environmentally friendly for disposal which, if handled or disposed of and can normally be recycled. -
Page 6: Guide To The Machine
Guide to the machine Exterior view a On/Off sensor for switching the coffee machine on and off b Display c Left arrow, for scrolling through the various programme options d OK sensor, for confirming the selection of a programme option and for saving a setting e Right arrow, for scrolling through the various programme options f Sensor for selecting hot water... -
Page 7: Interior View
Guide to the machine Interior view a Master switch b Ground coffee chute cover c Ground coffee chute d Slide control to select fineness of ground coffee e Coffee bean container f Drip tray with grid for easier carrying g Water container h Brew unit i Waste container j Central spout connector (connecting the brew unit and the central coffee spout) -
Page 8: Accessories Supplied
Accessories supplied Stainless steel milk flask For storing and keeping milk cold, with lid (with handle) and additional cap (not suitable for cleaning in a dishwasher) Containers Large and small containers for cleaning and rinsing the milk pipework Coffee spoon For adding the correct amount of ground coffee Cleaning powder For daily cleaning of the milk pipework... -
Page 9: Optional Accessories
Optional accessories Miele accessories and cleaning and conditioning products are available for your coffee machine. These can be ordered via the internet at www.miele-shop.com (depending on country), from Miele or from your Miele Chartered Agent. Stainless steel milk flask with cap... -
Page 10: Warning And Safety Instructions
They must be aware of the potential Any other usage is at the owner's risk. dangers caused by incorrect operation. Miele cannot be held liable for damage resulting from incorrect or improper use Remember that coffee and espresso or operation. -
Page 11: Technical Safety
Faulty components must only be earthing system (e.g. electric shock). replaced by genuine Miele original The machine must only be operated spare parts. The manufacturer can only when built-in to ensure that all electrical guarantee the safety of the appliance components are shielded. -
Page 12: Correct Use
Warning and Safety instructions Correct use The appliance is only completely isolated from the electricity supply Caution. Danger of burning. The when: liquids dispensed are very hot. – the mains fuse is disconnected, Never look directly at the lighting or –... - Page 13 The manufacturer cannot be held liable for damage arising from insufficient descaling. Only use the descaling tablets supplied by Miele and follow the instructions on the packet carefully. Use the exact proportions recommended. Otherwise the machine will be damaged.
-
Page 14: Using The Coffee Machine - First Steps
Using the coffee machine - first steps G Maintenance programme for milk The following notes should help you get to know your coffee machine before pipework, brew unit, descaling, starting to use it. rinsing Settings: Customising your Controls machine This machine has sensor controls which ^ The arrow sensors are used to select react to touch. -
Page 15: Switching Off
Using the coffee machine - first steps When you use the machine for the very If everything has been entered first time, you will be prompted to correctly, Set up successful will select a language. appear in the display. ^ Use the right or left arrow until the ^ Confirm this message by touching language you want appears in the the OK sensor. -
Page 16: Filling The Water And Coffee Bean Containers
Filling the water and coffee bean containers The coffee machine must be cleaned thoroughly (see "Cleaning and care") before you fill it with water and coffee beans. It is vital that you programme in the water hardness level of your water (see "Settings: Customising your machine - Setting the water hardness"). -
Page 17: Filling The Coffee Bean Container
Filling the water and coffee bean containers Filling the coffee bean container Only put roasted espresso or coffee beans in the container. Anything else, including ground coffee, will damage the grinder. Do not use coffee beans which have been treated with caramel, sugar or other substances. -
Page 18: Making Drinks
Making drinks Pre-warming cups Important: the water piping must be The cups should always be rinsed through every day and the pre-warmed to allow the flavour to machine cleaned thoroughly before develop and be retained. The aroma of the first drink of the day is prepared. espresso does not react well to cold. -
Page 19: Adjusting The Height Of The Central Spout
Making drinks Adjusting the height of the central spout The height of the central spout can be adjusted to suit the height of the cup so that the drink will not cool down as quickly as it would if the spout were further away from the cup. -
Page 20: Double Portion
Making drinks Making espresso and coffee Double portion using ready ground coffee If you want to dispense a double portion of coffee or espresso or to Adding ground coffee dispense two portions at the same time: If you want to make espresso or coffee ^ Touch the OK sensor twice whilst using ready ground coffee, you can "2 portions?"... -
Page 21: To Make A Drink
Making drinks Drinks with milk If you have not added any ground coffee, you must select "No". Otherwise the Stainless steel milk flask machine will assume that there is The stainless steel milk flask is vacuum ground coffee in the chute, and only insulated to keep the milk cold for a water will be dispensed the next time period of time. -
Page 22: Cappuccino, Latte Macchiato, Hot Milk, Milk Froth
Making drinks To make drinks with milk, Cappuccino, latte macchiato, hot milk, milk froth ^ Place a suitable cup or glass under both jets. For best results with latte macchiato, the glass should be placed beneath the jets such that the espresso flows into the centre of the milk froth. -
Page 23: User Profile Drinks
Making drinks User profile drinks After use The User profile function is used to Before switching the machine off for select the quantity of water and milk for any length of time, the pipework, brew your drink, as well as the fineness of the system, spouts and milk pipework need ground, temperature and pre-brewing to be cleaned (see "Cleaning and care:... -
Page 24: Setting The Coffee Grinder
Setting the coffee grinder A good espresso or coffee with a thick, The crema is evenly coloured but even crema depends not only on the pale quality, pressure and temperature of The beans have been ground too the water and the quality of the coffee coarsely. -
Page 25: Settings: Customising Your Machine
Settings: customising your machine It is easy to customise your machine to Timer: Here, you can set or activate the suit your exact requirements. timer. The following options are available in the "Set" menu: Settings menu – Switch on at: The machine can be set to switch on at a specific time of To select the various programme day. -
Page 26: Selecting A Language
Settings: customising your machine Selecting a language Water hardness: Soft, Medium, Hard, Very hard If you want to change the language Display: Contrast, Brightness used in the display, use the Settings menu and follow the flag symbol. Volume: Buzzer tones, Keypad tone ^ Select "Settings F"... -
Page 27: Setting The Time Of Day
Settings: customising your machine Setting the time of day Clock format ^ Select "Settings F" from the main ^ Use the arrow sensors to select menu and touch the OK sensor. "Clock format". ^ Use the right arrow to select a 24 h or Settings 12 h clock. -
Page 28: Setting The Timer
Settings: customising your machine Setting the timer If Automatic rinsing is set to "On", the ^ Select "Settings F" from the main machine will automatically carry out menu and touch the OK sensor. a brief rinse when it switches itself Settings If the System lock is activated, the Timer... - Page 29 Settings: customising your machine ^ First set the hour with one of the Activate arrow sensors. Touch the OK sensor. ^ Select "Activate" with the arrow ^ Then use the arrow sensors to set the sensors and touch the OK sensor. minutes.
-
Page 30: Coffee Jug (Making Several Cups One After The Other)
Settings: customising your machine Coffee jug (making several Setting the amount of coffee cups one after the other) Both the flavour and the crema on the coffee depend on the quantity of This function can be used to make up ground coffee used. -
Page 31: Setting Pre-Brewing
Settings: customising your machine Setting the temperature ^ Use the arrow sensor to select the drink that you wish to set the amount Different temperature ranges can be of coffee for and then touch the OK selected to take account of making sensor. -
Page 32: Setting Automatic Rinsing
Settings: customising your machine Setting Automatic rinsing Setting the Steam system To remove any coffee grounds and The machine has two heating systems. residual milk from the system, the water The Steam system enables milk froth or piping must be rinsed through before hot milk, and coffee or espresso to be the first drink of the day is prepared. -
Page 33: Lighting: Setting The Brightness
Settings: customising your machine Lighting: Setting the ^ Select "Lighting" and touch the OK sensor. brightness ^ Select "Switch off after" and touch the You can set how bright the lighting OK sensor. should be on the machine: ^ Select the switch-off time you want ^ Select "Settings F"... -
Page 34: Info (Showing The Number Of Drinks)
Settings: customising your machine Info (showing the number of Safety (Activating the System drinks) lock) The "Info" option enables you to check The machine can be locked to ensure how many drinks the machine has that it is not operated by unsupervised already dispensed or how many you children or persons who are can still dispense before it has to be... -
Page 35: To Override The System Lock
Settings: customising your machine To override the System lock ^ Touch the OK sensor for about 3 seconds. The machine is now temporarily unlocked and can be used to make drinks again. It locks itself as soon as the machine is switched off. Setting the water hardness ^ Dip the strip in your drinking water for For trouble-free operation of the coffee... -
Page 36: Setting The Display
Settings: customising your machine ^ Touch one of the arrow sensors to set – Very hard: Local water hardness levels 3-4 the contrast lower or higher or the 14-21 °d (2.5-3.8 mmol/l) or more brightness lighter or darker. Water through-flow: approx. 40 l ^ Touch the OK sensor to save the Steam through-flow: approx. -
Page 37: Showroom Programme
Settings: customising your machine Showroom programme All settings This function enables the machine to be This option sets "All settings" back to illuminated in a showroom situtation the factory default. without the heaters working. ^ Select "Reset" under "All settings", and touch the OK sensor. -
Page 38: Miele|Home
Miele|home – Display: Contrast (medium), Brightness (maximum) (available in selected countries) – Volume: Volume of buzzer tones and With Miele|home, the coffee machine keypad tone (maximum setting for becomes communication-enabled and both) can be monitored or operated via a pc –... -
Page 39: Programming The Amount: Setting The Portion Sizes
Programming the amount: setting the portion sizes Programming the amount of The flavour of the coffee produced depends on the type of coffee, how espresso, coffee, hot milk and finely the beans are ground and the milk froth via the OK sensor quantity of water used. -
Page 40: Programming The Proportions For Cappuccino Or Latte Macchiato
Programming the amount: setting the portion sizes Programming the proportions ^ Once sufficient amounts have flowed into the cup or glass and "Save" for cappuccino or latte shows in the display, press the OK macchiato via the OK sensor sensor to save the amount. ^ Place the appropriate cup or glass Each subsequent drink of this type will for the amount you want to... -
Page 41: Programming The Amount For Hot Water Via The Hot Water Sensor
Programming the amount: setting the portion sizes Programming the amount for Programming the amount via hot water via the Hot water "Settings" sensor ^ Select "Settings F" from the main menu, and then touch the OK sensor. ^ Place the appropriate cup for the amount you want to programme Settings under the hot water spout. -
Page 42: Setting Up User Profiles
Setting up User profiles To cater for different tastes and The following options only appear if you preferences, you can enter up to 9 have already entered a new User individual User profiles. For each User profile in addition to the Standard User profile, you can select the following profile: individual settings:... -
Page 43: Creating A User Profile
Setting up User profiles Creating a User profile Saving an entry ^ Use the arrow sensors to highlight ^ When you have finished making your "Create", and then touch the OK entry, use the arrow sensors to sensor. highlight the word "OK" and then touch the OK sensor. -
Page 44: Deleting A User Profile
Setting up User profiles Deleting a User profile After each use If you want to delete the User profile The machine will automatically revert to completely, the Standard User profile each time a drink is dispensed. ^ Select "Delete User profile" using the ^ Select "After each use"... -
Page 45: Cleaning And Care
Cleaning and care Overview Clean the coffee machine regularly to avoid a build-up of bacteria. Time interval What do I have to do? Rinse milk pipework Each time milk is used to make a drink, if more than one hour has passed since the last drink was made Rinse the system (pipework) -
Page 46: Rinse The System
Cleaning and care Rinse the system Always allow the machine to cool Before switching the machine off for down before cleaning. Please be any length of time, the pipework, brew aware that the water in the drip tray system and central spout need to be will be hot. -
Page 47: Milk Pipework
Cleaning and care Milk pipework Clean milk pipework To prevent milk going off in the Rinse milk pipework machine and the pipework getting To prevent milk going off in the clogged up, it should be cleaned at the machine and the pipework getting end of each day using the cleaning clogged up, it should be rinsed through agent supplied. -
Page 48: Clean Milk Pipework Of Any Blockages
Hang it in the machine where the stainless steel milk flask normally sits. It is important to use the Miele cleaning agent as it has been developed for this coffee machine. It is available via the internet at www.miele-shop.com (depending on... - Page 49 Cleaning and care The hoses can now be cleaned with a brush under running water. ^ Take the cover off together with the milk pipework. Clean the whole component in the dishwasher without ^ Push the brush into both milk pipes dismantling it.
-
Page 50: Stainless Steel Milk Flask
Cleaning and care Stainless steel milk flask The stainless steel milk flask and lid must be washed by hand using hot water. It is important to keep the top of the flask and the seals clean (whilst filling it and carrying it). Any soiling can lead to a malfunction of the flask in the machine. -
Page 51: The Central Spout
Cleaning and care The central spout ^ Remove the two rubber stoppers ^ Pull the central spout down as far as (a), and manually clean these and it will go (a), and pull the cover the jets thoroughly. forwards to remove. If required, remove the bypass tube (b) as well. -
Page 52: Water Container
Cleaning and care Water container Waste container Empty the water container daily and fill After a certain period of time a reminder with fresh, cold tap water just before to empty the waste container will use. appear in the display. The waste container must be cleaned when this When cleaning, make sure that there message appears. -
Page 53: Drip Tray
Cleaning and care Drip tray There is a sensor in the drip tray which causes a message to appear in the display when the drip tray is full and needs to be emptied. Remove the tray and empty and clean it when this message appears. -
Page 54: Coffee Bean Container
Cleaning and care Coffee bean container Interior and machine door ^ First take out all removable parts and The coffee bean container must be then clean the interior and the cleaned by hand with hot water and machine door with a mild solution of a little washing-up liquid. -
Page 55: Brew Unit
Cleaning and care Brew unit Leave the handle in the same The brew unit must be cleaned once position, otherwise the brew unit will a week by hand and without using be out of alignment and you will not washing-up liquid, because the be able to push it back into the moving parts are lubricated and the coffee machine. -
Page 56: Degreasing The Brew Unit
(depending on country), from your Miele Chartered Agent or from Miele. To remind you to degrease the brew unit, the message "Please run the cleaning programme" will appear in the display after 200 portions. -
Page 57: Machine Front
Cleaning and care Machine front When prompted to Drop a cleaning tablet in the ground coffee chute, If soiling is not removed promptly, it could cause the surface of the machine to alter or discolour. Remove any soiling immediately. ^ Switch the machine off with the On/Off button. - Page 58 Cleaning and care Avoid the following on all types of front: – cleaning agents containing soda, amonia, acids or chlorides, – solvent-based cleaning agents, – cleaning agents containing descaling agents, – stainless steel cleaning agents, – dishwasher cleaner, – abrasive cleaning agents, e.g. powder cleaners and cream cleaners, –...
-
Page 59: Descaling The Machine
Miele or via the internet at No. of portions until descaling: 50. www.miele-shop.com (depending on The remaining number of drinks that country). -
Page 60: To Run The Descaling Programme
Descaling the machine To run the descaling To dissolve the descaling tablets programme ^ take the water container out and fill it to the k mark with lukewarm water. (Do not use less water than this Maintenance because this would cause the descaling programme to finish before ^ Touch the right arrow sensor until it has been completed properly). -
Page 61: Problem Solving Guide
The operation, can be put right without time will depend on which switch-off contacting Miele. time you have programmed into the Please note that a call-out charge will machine. - Page 62 Problem solving guide ... the machine does not switch on ... milk froth or milk is not flowing even although the "Switch on at" freely or not at all out of the central setting for the timer has been spout. activated.
- Page 63 ^ If the bean container is not empty, Because the process is time controlled, call Miele. If it is empty, fill the it is possible that the process has taken container with fresh beans. so long that there is no time left for brewing.
- Page 64 Problem solving guide ^ If this fault message continues to ... coffee preparation has been appear, please call Miele. interrupted. If the water container empties whilst a ... the machine does not rinse drink is being prepared, a message will...
- Page 65 Problem solving guide ... there is a lot of residual "coffee ... the coffee machine makes loud water" in the waste container. noises during the descaling programme. If the slide control for the grinder is set to too coarse a setting, too much During the descaling programme you residual "coffee water"...
- Page 66 If the fault message high. still appears in the display, call Miele..the cap for the central spout ... too much crema has formed and is connector is missing (see "Guide to overflowing above the coffee spouts.
- Page 67 (see "Cleaning and care - Brew unit"). If this fault message continues to appear in the display, please call Miele..the message "Fault - 28" appears in the display. Enough ground coffee for one portion, i.e.
- Page 68 ^ Switch off the machine and shortly after switch it back on again. If this fault message continues to appear in the display, please call Miele..the message "Check the brew unit" appears in the display. The brew unit may be dirty.
-
Page 69: After Sales Service
– your Miele Chartered Agent – Miele The telephone number and address for Miele is given on the back page. When contacting your Chartered Agent or Miele, please quote the model and serial number of your appliance. This information is given on the data plate inside your appliance. -
Page 70: Electrical Connection
Electrical connection All electrical work should be carried out Important only by a suitably competent person, in The wires in the mains lead are strict accordance with national and coloured in accordance with the local safety regulations. following code: The machine is supplied with a mains Green/yellow = earth cable with moulded plug for connection Blue... -
Page 71: Installation
The appliance is designed to be built into a tall unit. It can also be combined with other Miele built-in appliances. If the coffee machine is to be built in above another appliance, there must be a full-width, closed shelf between them. -
Page 72: Installation
^ If the housing unit niche is not fitted with a sealing strip you should fit a Miele sealing strip to the machine before installing it. This is fitted from the back of the machine. -
Page 73: Adjusting The Door Hinges
Installation Adjusting the door hinges If the machine door becomes difficult to open or close after installation, you can adjust the hinges to realign it: ^ Carefully turn the lower socket screws a to centre the machine in the niche. ^ To adjust the door in direction a, ^ Tighten both upper socket screws b turn screw a. - Page 76 Alteration rights reserved / 0511 M.-Nr. 07 816 860 / 02 CVA 5060, CVA 5068...