Rear Panel; Remote Control Connectors And Rs-232C Terminal - Yamaha DVD-S2500 Owner's Manual

Functional Overview

Rear panel

HDMI output terminal
– connect to the HDMI jack on a
HDMI-compatible AV component
SCAN MODE switch
– switches the component video output
signals between progressive and
interlace
COMPONENT video jacks
– connect to an AV receiver with Y P
P inputs
R
COAXIAL digital audio output
– connect to the audio input jack on
digital (coaxial) audio equipment
S VIDEO output
– connect to an S-Video input jack on
your AV receiver
VIDEO output (composite video
out)
– connect to the video input jack on your
AV receiver
Remote control connectors
and RS-232C terminal
Remote control connectors are used in custom installations to transmit remote control signals via cable.
• Connect REMOTE CONTROL IN to an output on your remote control system.
• Connect REMOTE CONTROL OUT to a remote control input on another component to enable system control.
This unit is also equipped with RS-232C terminal. Consult your dealer for details.
Caution: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause
permanent damage to the unit.
6
– use as an expansion terminal for commercial use
REMOTE CONTROL connectors
– use in custom installations to transmit remote
control signals via cable connections
B – connect to the i.LINK jack on an
OPTICAL digital audio output jack
– connect to the audio input jack on digital
MIXED 2CH audio output jacks
– connect to audio inputs on your AV receiver
6CH DISCRETE audio output jacks
– connect to an AV receiver with 6-ch discrete
– connect to a standard AC outlet
RS-232C terminal
Consult your dealer for details
i.LINK connectors
i.LINK-compatible component
(optical) audio equipment
or stereo system
audio input jacks
AC IN (Main-inlet)