Pc Camera Driver Installation (Winxp) - Gericom Hollywood D470W User Manual

Optional Modules
7
7 - 12 PC Camera

PC Camera Driver Installation (WinXP)

1. Insert the PC Camera CD-ROM into the CD Drive.
2. Click Start (menu) > Run ...
3. Navigate (Browse...) to D:\Default setting_60Hz\Setup.exe and click
OK.
4. Click Next ( click Continue Anyway if asked if you want to continue at
any time).
5. Click Finish.
6. Restart the computer.
7. After restart the computer will bring up the Found New Hardware Wiz-
ard for the USB PC Camera 301P (if you see the Found New Hardware
Wizard for the Universal Serial Bus (USB) Controller appear first,
click Cancel to close the window).
8. Click "Install from a list or specific location (Advanced)" then click
Next.
9. Select "Search for the best driver in these locations." and select
ONLY "Include this location in the search:".
10. Navigate (Browse...) to D:\Default setting_60Hz and click OK > Next
> Finish ( click Continue Anyway if asked if you want to continue).
11. Wait for the System Settings Change window to appear, then click Yes
to restart the computer.
12. To run the application software go to the PC Camera 301P USB Cam-
era item in the Start > Programs/All Programs menu, and select the
AMCAP program (see "AMCAP" on page 7 - 15).