Storing Preset Stations - Sanyo FXD-MP690 Operating Instructions Manual

STORING PRESET STATIONS .................................5

The preset buttons 5 can be used to store 6 stations in each band (FM 1, FM 2, FM 3 and MW,
LW) for convenient access to your favorite stations.
• Programming stations ..... 1. Select the desired band, then tune in the station you want to
• Quick tuning .................... Select the desired band, then press one of the six preset buttons 5.
LOCAL/DISTANT SELECTION ................................6
Press LOC button 6 to set local or distant stations.
Use local position (LOCAL/LOC appear on the display) for reception of strong station, and
distant position (DX appears on the display) for reception of weaker stations. This function is
effective during AUTO SEEK operation.
FREQUENCY SCAN OPERATION...........................7
Press SCAN button 7 to set the function to frequency scan mode, which scans stations and
stop for several seconds at each receivable signal. Press SCAN button 7 again to stop
scanning.
store in memory.
2. Press and hold one of the preset buttons 5 for more than 2
seconds until the corresponding preset button number appears.
Repeat steps 1. and 2. to program additional stations.
9