Mode Selection; Set The Clock; Mute Function - Sanyo FXD-MP690 Operating Instructions Manual

e.g.
When preset button is pressed.
When BAND/LOUD button is pressed.
When AS/PS/MP3 button is pressed.
- BEEP ALL mode:
The beep is generated when every button is pressed.
- BEEP OFF mode:
The beep is disabled.

MODE SELECTION...................................................4

Press SOURCE button 4 to choose desired listening mode. (e.g. radio mode to CD mode.)

SET THE CLOCK..............................................5,8,9

Press the DISP button 5, the clock is shown on the LCD display. Then hold down the button until
the clock flashes. Then press the TUN/SEK/TRK
TUN/SEK/TRK button 9 to change minutes.
LOUDNESS EFFECT................................................6
Press BAND/LOUD button 6 for several seconds to reinforce the bass output. Press it for several
seconds again to release this function.
EQUALIZATION.....................................................7
Press SOUND button 7 to turn on equalization function and to select desired audio mode. There
are five kinds of mode as below:
FLAT

MUTE FUNCTION.................................................10

Press MUTE button 10 to mute down the sound instantly. If any button is pressed in the mute
state, the mute state is released.
CLASSICS POP M
7
button 8 to change hours or
ROCK M DSP OFF