Table of Contents
Advertisement
RADIO OPERATION
SWITCHING TO RADIO MODE............................1
Press SOURCE button 1 to select radio mode, the radio mode appears in the display together
with the memory band and frequency.
SELECTING THE FREQUENCY BAND.................2
At radio mode, press BAND/LOUD button 2 shortly to select the desired band.
The reception band will change in the following order:
FM1
RADIO TUNING................................................3
Press the TUN/SEK/TRK
for several seconds until "MANUAL" appears on the display, the manual tuning mode is selected.
If both buttons have not pressed for several seconds, they will return to seek tuning mode and
"AUTO" appeared on the display.
AUTOMATIC MEMORY
STORING & PROGRAM SCANNING.....................4
-
Automatic memory storing
Press AS/PS button 4 for several seconds, the radio searches for 6 strongest stations and
stores them into the presets of the currently selected band. While searching, "LOC" appears
on the display.
-
Program scanning
Press AS/PS button 4 shortly to scan preset station. When the field strength level is more
than the threshold level of stop level, the radio is holding at that preset number for several
seconds with release mute, then searches again.
5
FM2
FM3
or
button 3 shortly to activate automatic seek function. Press
8
6
2
4
7
MW
LW
1
3
Advertisement
Table of Contents
