Using Prime Time Anytime And Auto Hop - Dish Network Hopper Sling User Manual

913.book Page 66 Tuesday, January 15, 2013 4:57 PM
Chapter 9
Using PrimeTime Anytime™ and AutoHop™
U
SING
The PrimeTime Anytime™ feature of your Hopper with Sling HD DVR, once you enable it,
will begin to provide instant access to your favorite shows on ABC, CBS, FOX and NBC in
high definition. (Note if any of your local HD channels are not available in your market,
these shows cannot be recorded automatically.) Programs airing during prime-time hours,
8-11 p.m. ET/PT Monday through Saturday, and 7-11 p.m. ET/PT Sunday, will be recorded
and accessible for eight days from their initial air dates, by default. And you can always
save these recordings to your DVR library to be able to watch them at any time.
Enabling the PrimeTime Anytime™ feature
To enable the PrimeTime Anytime™ feature on your Hopper HD DVR, do the following:
1
Press the MENU button on your DISH remote control or front panel, highlight the Prime-
Time Anytime tile and press SELECT.
2
Select the Enable option to turn on the feature. On the Setup screen for the feature, you
can change which channels are recorded and on which nights of the week. You can also
change the default of eight days before older recordings are replaced with newer ones.
3
Highlight and select Done. Then on the PrimeTime Anytime™ screen, select Save.
4
If you Enabled the feature, it will begin recording HD prime-time shows each night. Note
that Enabling the feature does not instantly populate the folder with any saved content;
66
P T A
RIME IME NYTIME
™ A H
AND UTO OP
™