Video Playback; Lipsync (Audio/Video Synchronizing) - Sharp SD-WH1000U Operation Manual

Music/Video/Picture Playback

Video Playback

CD-R CD-RW DVD-R
BD-R BD-RE
DVD-RW
This Player can display video files recorded on CD-R/
RW discs, DVD-R/RW discs, BD-R discs, BD-RE
discs.
• For details on the video files that you can display using
this player, refer to page 12.
Viewing a video
1
Press a/b to select "Video" , then press d or
ENTER.
2
Press a/b to select "DISC*" , then press d or
ENTER.
* Display name varies depending on the type of media
inserted.
• If only a DISC is connected, the "DISC" , selection
screen does not appear. In such cases, after step 1,
proceed to step 3.
3
Press a/b to select a folder or file.
• When you select a folder, press ENTER to open it,
a/b
and then press
Shows item varies depending on the type of media.
4
Press ENTER to play back the selected file.
• The selected video file will start playback.
5
To stop the playback at any time, press H STOP.
to select a file in the folder.
Lipsync (audio/video
synchronizing)
Some motions have a slightly delay when showing
Video playback.
By adding a bit of sound delay, you can adjust the
sound of WiSA output and Analog output to match
the video.
When you connected display supports the automatic
audio/video synchronizing capability ("lipsync")
with an HDMI cable, and delay setting set to "Auto" ,
automatically adjusted the sound delay time to match
the video. If you find the automatically set delay time
unsuitable, set the delay time manually.
1
Press AUDIO SETUP to display "Audio Delay" .
2
Press a/b to adjust the gap between audio and
video.
(Off, Auto, 1 to 800 msec.)
NOTE
• About Digital output, when sampling frequency of
contents is not 48 kHz, maximum delay will be 200 msec.
38