Digital Audio Connection; Connecting To The Digital Audio Terminal - Sharp SD-WH1000U Operation Manual

Digital Audio Connection

Connecting to the Digital Audio Terminal

• You can connect audio equipment or the TV to the OPTICAL/COAXIAL DIGITAL AUDIO OUT terminal.
STEPS
1 Be sure to turn off this Player and the equipment before making any connections.
2 Firmly connect an optical digital cable (commercially available) to the optical digital audio terminals (1 and 2).
Or firmly connect a RCA type cable (commercial available) to the coaxial digital audio terminals (1 and 2).
• When using OPTICAL/COAXIAL DIGITAL
AUDIO OUT,
5.1 ch Digital Output is available.
7.1 ch Digital Output is not available.
NOTE:
7.1 ch Audio is available via the HDMI
terminal.
1
To COAXIAL DIGITAL
AUDIO OUT terminal
RCA type cable
(commercially available)
2
To COAXIAL DIGITAL
AUDIO IN terminal
Audio equipment with a digital audio
After connecting
• If necessary, perform the Audio Settings (page 44).
• Prepare the desired disc or content and start playback (pages
1
To OPTICAL
DIGITAL AUDIO
OUT terminal
Optical digital cable
(commercially available)
2
To OPTICAL
DIGITAL AUDIO
IN terminal
Amplifier
input terminal
This Player
1
To COAXIAL
DIGITAL AUDIO
IN terminal
RCA type cable
(commercially
available)
2
To COAXIAL
DIGITAL AUDIO
OUT terminal
Digital TV box, etc.
Audio equipment with a digital audio
output terminal
31 - 40).
18
1
To OPTICAL
DIGITAL AUDIO
IN terminal
Optical digital
cable
(commercially
available)
2
To OPTICAL
DIGITAL AUDIO
OUT terminal