Canon VB-H43 Operation Manual page 145

Opening/Closing and Moving Control Items
Clicking the title of a control item will open or close it.
⇔
You can open the various control items even without
obtaining the camera control privileges, but all items other
than [Video Reception] are not available.
You can also reorder control items using the up/down
buttons.
⇔
Performing Operations and Settings
Click the camera control buttons to set the pan, tilt and
zoom operations as well as the speed.
(1)
(4)
(1) [Pan/Tilt] button
Move pan and tilt in the direction of the arrows.
Operation will continue as long as you are holding
down the button and will stop when you release it.
Clicking the center button will make the camera face
straight forwards.
(2) [Pan/Tilt] Speed
Select a speed from [Fast], [Normal] and [Slow].
(3) [Control speed by zoom position] checkbox
Check the box to adjust the pan/tilt speed in response
to the visible range. Pan/tilt speed is slowest at
maximum telephoto, and fastest at maximum wide
angle.
Uncheck the box to pan/tilt at a set speed.
Performing Operations and Settings in the Admin Viewer
The checkbox is always checked if [Control by zoom
position] is selected in [Camera] > [Camera Control]
> [Pan/Tilt Speed Control] on the setting page (p. 55).
The pan/tilt speed control can be enabled/disabled
using this checkbox when [Control at set speed] is
selected in [Camera] > [Camera Control] > [Pan/Tilt
Speed Control].
(4) [Zoom] button
Zooms in or out. Operation will continue as long as
you are holding down the button and will stop when
you release it.
(5) [Zoom] Speed
Set the zoom speed to [Fast] or [Slow].
Note
Changing the [Pan/Tilt] speed or [Zoom] speed will not change
the speed of the slider, or of the pan, tilt or zoom in panorama.
Setting the Smart Shade Control
The smart shade control function differs from backlight
compensation in that only dark areas are brightened while
bright areas are kept intact.
(1) [Smart Shade Control]
Select [Auto], [Manual], or [Disable].
(2)
(2) Adjusting the Smart Shade Control
When smart shade control is [Manual], set one of the 7
levels from [1] (Mild) to [7] (Strong).
(3)
Example: If the background is bright and the subject
is hard to see, this function brightens dark areas to
(5)
make the subject clearer.
In comparison to backlight compensation, smart
shade control can reduce overexposure of bright
areas.
OFF
Important
[Auto] cannot be selected for [Smart Shade Control] if
[Exposure] is set to [Manual].
(1)
(2)
Smart Shade BLC (Back Light
Control Compensation)
7
145