Preset Tour - Canon VB-H43 Operation Manual

Preset Tour

Set a preset tour whereby the camera tours and monitors
the multiple presets currently set.
[Preset Tour] Tab Display Screen
(1)
(2)
(3)
(4)
(6)
(8)
(9)
(10)
(11) (12)
(1) [Preset Tour] selection box.
Select when you want to perform a preset tour from
the following options.
[Not used]
Preset tour is not performed.
[For Viewers]
Preset tour is performed when a camera is
connected via the VB Viewer, etc.
[Always]
Preset tour is always performed.
(2) [Set Preset Tour Time] checkbox
This setting is enabled when [For Viewers] or [Always]
is selected in (1). Select the checkbox to configure a
preset tour at a predetermined time, and enter the
start time and stop time for the preset tour.
(3) Tour schedule list
A list of presets set for preset tour.
(4) [Up] / [Down]
Select preset in the list and click [Up] or [Down] to
change sequence of the tour schedule list. Presets
tours are performed in order from the top of the list.
(5) [Delete]
Delete the preset selected from the tour schedule list.
(6) [Preset] selection box
Select the preset you want to add to the tour schedule
list.
(7) [Preview]
The camera switches to the camera angle selected in
[Preset], and the new angle can be checked in the
image display area.
(8) [Speed (PT)]
Select [Slow], [Normal], or [Fast] for the moving speed
of the camera during panning/tilting.
(5)
(7)
(9) [Speed (Z)]
Select [Slow] or [Fast] for the camera speed during
zoom.
(10)[Pause (sec)]
Set the time at which the camera stops at the preset
position.
You can set between 0 and 120 seconds in 5-second
increments.
You can set between 1 and 120 seconds in 1-second
increments.
(11)[Add]
Add the preset to the tour schedule list.
(12)[Change]
Change the speed or pause time between presets
selected from the tour schedule list.
Note
• Preset tour is not performed while the camera is being
controlled with viewers, Admin Tools, etc.
• Preset tour is not performed when control privileges are
obtained by RM-Lite.
Setting the Preset Tour
1 Select the touring method from the [Preset Tour]
selection box.
Select [For Viewers] or [Always].
Setting the preset tour time
Select the [Set Preset Tour Time] checkbox.
Enter values for [Start Time] and [End Time] to set the
preset tour time.
Preset Setting Tool
6
105