Wiring - Harbor Breeze 40016 Manual

WIRING

WARNING: To reduce the risk of fire, electrical shock, or personal injury, wire connectors
provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from
the fan. If your house wire is larger than 12 gauges there is more than one house wire to connect to
the two fan lead wires, consult an electrician for the proper size wire connectors to use.
CAUTION: Be sure outlet box is properly grounded or that a ground (green or base) wire is
present.
WARNING: if house wires are different colors than refereed to in the following step, stop
immediately. A professional electrician is recommended to determine wiring.
1. Choose wiring diagram that fits your situation and
make appropriate wiring connections as follows:
[NOTE: For each wire connection below, and on the
following page, use one of the wire connectors (EE),
making sure to screw wire connector (EE) on in a
clockwise direction.
1A. FAN AND LIGHT CONTROLLED BY PULL CHAINS:
connect BLACK and BLUE wire from fan to BLACK
wire from ceiling. Connect WHITE wire from fan
to WHITE wire form ceiling. Connect all GROUND
(GREEN) wires together from fan to BARE/GREEN
wire from ceiling. [Fig. 1A]
1B. FAN CONTROLLED BY PULL CHAIN, LIGHT BY
WALL SWITCH: If you intend to control the fan by pull
chains and light with a separate wall switch, connect
BLACK wire from fan to BLACK wire from ceiling.
Connect BLUE wire from fan to the BLACK wire from
the independent wall switch for the light. Connect
WHITE wire from fan to WHITE wire from ceiling.
Connect all GROUND (GREEN) wires together from
fan to BARE/GREEN wire form ceiling. [Fig. 1B]
Hardware Used
Wire connector
EE
1A
FAN AND LIGHT CONTROLLED BY PULL CHAIN
1B
x 4
10