Stratasys Fortus 450mc User Manual page 228

Note: All recent calibration data (i.e. tip offset values), printer settings/
configurations and material license information are automatically retained
during the software update process. Files sent to the Job Queue are not retained.
5. Insert the Controller Software Update CD into the workstation PC and then
transfer the .upg file to a known location on the workstation's hard drive.
6. From the workstation's Start Menu, navigate to All Programs > Insight (installed
version) > Control Center (installed version) or double-click the Control Center
shortcut (if available). See
7. Within Control Center, select the Services tab. Ensure that your 450mc printer is
selected from the drop-down menu then click the Update Software button. (See
"Add Printer to Control Center" on page 204
from the drop-down menu.)
Figure 7-20: Update Software Button Location
8. Control Center will begin establishing a connection with the printer. Once a
connection is established, the workstation PC's file explorer will open.
Figure 7-3 on page 205.
if you cannot select your printer
219