Height Adjustment - Miele B 2312 Operating Instructions Manual

Height adjustment

You can adjust the steam ironing
system to suit your individual height.
Make sure the mains connection cable
does not become jammed while doing
this.
Ensure the ironing board is locked
into place on both sides of the tower
(see 'Assembling').
Otherwise the height of the ironing
board will not be able to be
adjusted.
^ Activate one of the dials located on
either side of the tower by turning it
towards q as far as it will go and
then hold it there.
^ At the same time, use your other
hand to pull the handle on the back
of the tower upwards.
or
^ Push the handle on the tower
downwards to lower the ironing
board.
Do not push down on the ironing
board itself.
^ When the ironing board is at the
required height, release the dial and
it will return to the centre position.
We recommend adjusting the ironing
board to about the height of your hips
in order for you to be able to iron
comfortably.
The ironing board will remain at the set
position until adjusted again.
As an additional means of stabilising
the ironing boad at the required height,
it audibly clicks into place when any
load is placed on it.
The highest working position is approx.
102 cm.
Assembling
17