Samsung SNB-6011 User Manual page 54

setup screen
• ATC sensitivity : Affect the transfer rate according to the variance in the network
bandwidth.
The transfer rate will be adjusted to the fastest if the bandwidth is <Very high>,
and adjusted to the latest if the bandwidth is <Very low>.
• ATC limit : If the quality or frame rate is adjusted, the property will be changed to
the applied value (%) against the previous setting value (100%).
Note that if you reduce the property value too much, you may encounter flickering
on the screen. So it is advisable to adjust the value within the threshold.

J
It is recommended to apply ATC control only for cameras supporting ATC.

Set the ATC sensitivity to <Very low> in a network environment with high variance in the network
bandwidth.

If the network connection is unstable, you may encounter flickering on the screen.
7. Select Able or Disable for the Crop Encoding function.
For more details, refer to "To Use Crop Encoding". (Page 57)
• Crop encoding : It cuts only the selected area out of the full screen and outputs it
at the resolution specified in <Profile setting>.
The resolution should be less than the Crop Encoding setting area.
8. When done, click [Apply (
54_ setup screen
)].