Page 2
Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
overview IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
Page 4
overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
Page 5
Class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Disconnection Device Disconnect the main plug from the apparatus, if it’s defected.
Page 6
overview Please read the following recommend safety precautions carefully. Do not place this apparatus on an uneven surface. Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. ...
CONTENTS Important Safety Instructions OVERVIEW Product Features Recomended PC Specifications What’s Included At a Glance Mounting the Lens INSTALLATION & Connecting with other Device CONNECTION Connecting the Camera Directly NETWORK CONNECTION to Local Area Networking AND SETUP Connecting the Camera Directly to a DHCP Based DSL/Cable Modem Connecting the Camera Directly...
overview WEB VIEWER Connecting to the Camera Login Installing STW WebViewer Plugin Using the Live Screen Setup SETUP SCREEN Video Setup Network Setup Event Setup System Setup Specification APPENDIX Product Overview Troubleshooting Open Source Announcement License GPL/LGPL Software License 8_ overview...
PRODUCT FEATURES • Multi-Streaming This network camera can display videos in different resolutions and qualities simultaneously using different CODECs. • Web Browser-based Monitoring Using the Internet web browser to display the image in a local network environment. • Alarm If an event occurs, the event-related video will be transferred to the email or FTP server specified by the user.
overview WHAT’S INCLUDED Please check if your camera and accessories are all included in the product package. Appearance Item Name Quantity Description Camera Instruction book, Installer S/W CD, CMS S/W DVD Quick Guide (Optional) Used to test the camera connection to a Cable for the testing monitor portable display device Alarm Cable...
AT A GLANCE Front Side Item Description Used to fix the camera on a mounting bracket. The screw size : use this screw to fix the mounting bracket. Mounting Bracket 1/4" - 20UNC (20THREAD/1") Screw Hole L : 4.5mm±0.2mm (ISO Standard), or 0.197" (ASA Standard) Auto Iris Lens Used to supply power and output signal to control the iris of the lens.
Page 12
overview Item Description FBL Lever Adjust the FBL (Flange-Back Length) value according to the lens. Auto Iris Lens Installed on the lens adaptor. (Optional) Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied ethanol.
Rear Side NETWORK ALARM LINK DC12V RESET VIDEO Item Description Network Port Used to connect a PoE or LAN cable. Lightning protective Used to discharge the lightning current safely outside in order to protect the grounding port camera. Power Port Used to plug the power cable.
installation & connection MOUNTING THE LENS Disconnect the power before proceeding. The C lens and CS lens are not included in the product package. Mounting the lens onto the C/CS mount camera 1. Fit the lens into the mounting screw hole and turn it clockwise. Tighten the screw. Then, it rotates in SLIP mode.
Page 15
5. Use the focus lever and zoom lever to fit the zoom factor and focus. Then, fix the lens with the camera. Using a lens with hood The round hood is mounted on the camera lens, which is designed to prevent flare/ghost/ light spreading.
installation & connection CONNECTING WITH OTHER DEVICE Monitor (for installation) NETWORK ALARM LINK DC12V VIDEO Power Ethernet The BNC Out terminal of the product is provided for easier installation, and is not recommended for monitoring purposes. If you keep the BNC cable connected, a risk of lightening may cause damage or malfunction to the product.
Page 17
Be careful not to reverse the polarity when you connect the power cable. Please connect the power adapter when the installation is completed. As shown in the table below, you may encounter a voltage-sag depending on the wire length. If you use an excessively long wire for camera connection, the camera may not work properly.
Page 18
installation & connection To connect to the alarm input port Connect the alarm cable to the ALARM IN port in the rear panel. NETWORK ALARM LINK DC12V RESET VIDEO SENSOR Port Description Port Description ALARM IN Alarm Input Sensor Port GND port for the sensor To connect the external sensor Connect one strand of each signal line (2-strand) of the sensors to the [ALARM IN] port,...
network connection and setup You can set up the network settings according to your network configurations. CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN 1. Launch an Internet browser on the local PC. 2.
network connection and setup CONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL/CABLE MODEM INTERNET DSL/Cable Modem External Remote PC Camera DDNS Server (Data Center, KOREA) 1. Use the cross LAN cable to connect the network cable directly to your PC. 2.
CONNECTING THE CAMERA DIRECTLY TO A PPPoE MODEM INTERNET PPPoE Modem External Remote PC Camera DDNS Server (Data Center, KOREA) 1. Use the cross LAN cable to connect the network cable directly to your PC. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.
network connection and setup CONNECTING THE CAMERA TO A BROADBAND ROUTER WITH THE PPPoE/CABLE MODEM This is for a small network environment such as homes, SOHO and ordinary shops. Camera INTERNET PPPoE or PPPoE or Broadband Cable Modem Cable Modem Router External Remote PC Camera...
BUTTONS USED IN IP INSTALLER Item Description Model name of the connected camera. Device Name Click the column to sort the list by model name. However, search will be stopped if clicked during the search. Alias This function is not currently implemented. Displays either <Static>, <Dynamic>...
For the IP installer, use only the installer version provided in the installation CD or use the latest one if available. You can download the latest version from the Samsung web site (www.samsungcctv.com). STATIC IP SETUP Manual Network Setup Run <IP Installer_vX.XX.exe>...
Page 25
3. In the <Address> pane, provide the necessary information. • MAC (Ethernet) Address : The MAC (Ethernet) address of the applicable camera will be set automatically so you don't need to input it manually. You can configure the static IP settings only if the DHCP checkbox is unchecked.
Page 26
network connection and setup If using a Broadband Router • IP Address : Enter an address falling in the IP range provided by the Broadband Router. ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254 • Subnet Mask : The <Subnet Mask> of the Broadband Router will be the <Subnet Mask>...
Page 27
Auto Network Setup Run <IP Installer_vX.XX.exe> to display the camera search list. At the initial startup, both [Auto Set] and [Manual Set] will be grayed out. For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this function.
network connection and setup DYNAMIC IP SETUP Dynamic IP Environment Setup • Example of the Dynamic IP environment - If a Broadband Router, with cameras connected, is assigned an IP address by the DHCP server - If connecting the camera directly to modem using the DHCP protocols - If IPs are assigned by the internal DHCP server via the LAN Checking the Dynamic IP 1.
PORT RANGE FORWARD (PORT MAPPING) SETUP If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it. Manual Port Range Forwarding 1.
Page 30
network connection and setup Setting up Port Range Forward for several network cameras When several network cameras are connected to one Broadband Router device, you should forward the TCP 943 port of the router to the TCP 943 port of a connected camera. ...
CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC 1. Run the IP Installer. It will scan for connected cameras and display them as a list. 2. Double-click a camera to access. The Internet browser starts and connects to the camera. ...
web viewer web viewer CONNECTING TO THE CAMERA Normally, you would 1. Launch the Internet browser. 2. Type the IP address of the camera in the address bar. ex) • IP address (IPv4) : 192.168.1.100 http://192.168.1.100 - the Login dialog should appear. •...
IP when you try to access the device. To add the IP address to the <DDNS> server, visit www.samsungipolis.com and register your device, and set the DDNS option to <Samsung DDNS> before providing the product ID for the DDNS server.
web viewer INSTALLING STW WebViewer PLUGIN If connecting to a camera for the first time, you will see the installation message. Then, install the required WebViewer Plugin to access the camera and control the video from it in real time. ...
USING THE LIVE SCREEN Item Description Monitoring Move to the monitoring screen. Setup Move to the Setup screen. Viewer Screen Displays the Live video on the screen. Profile type You can select a profile type in <Video profile> under the <Video> setup menu. Capture Saves the snapshot as an image file in the .bmp or .jpg format.
Page 36
web viewer Item Description Screen The video size of the camera will switch to as big as the Web browser. Optimization Hide the context The left-corner context menu will disappear but only the menu icon. menu Use the mouse wheel to control the digital zooming. To capture the snapshot 1.
setup screen SETUP You can configure the video, network, event and system settings of the camera via the network. 1. In the Live screen, click [ Setup ( ) ] . 2. The Setup screen appears. VIDEO SETUP Video profile 1.
Page 38
If the network connection is unstable, you may encounter flickering on the screen. 6. When done, click [Apply ( For SNB-7001, select and set <Megapixel Mode>. You can choose from <2-Megapixel> and <3-Megapixel>. If you change the mode, the confirmation message appears before the change is applied.
Page 39
• Entropy coding : Reduce the possible compression loss due to encoding. • Smart codec : Specify the use of Smart codec. This is available only with SNB-7001. The Smart Codec will be active only if the codec is of H.264 and the compression system is CBR.
Page 40
setup screen What is GOP size? GOP(Group of Pictures) is a set of video frames for H.264 compression, indicating a collection of frames from the initial I-Frame (key frame) to the next I-Frame. GOP consists of 2 kinds of frames: I-Frame and P-Frame. I-Frame is the basic frame for the compression, also known as Key Frame, which contains one complete image data.
To set the privacy zone You can specify a certain area of the camera video to be protected for your privacy. 1. Set it to <On>. 2. When done, click [Apply ( 3. Place the cursor at a point in the video and drag it to whatever you need.
Page 42
setup screen White balance Setup You can correct the image colors based on white under any lighting conditions. 1. Select <White balance>. 2. Select <Mode>. • ATW : Corrects the colors of the camera video automatically. It is available in the color temperature of between 1,800°K and 10,500°K. •...
Page 43
BLC Setup You can specify a desired area on the video manually and set the area to be displayed more clearly. 1. Select <Backlight>. 2. Set <Mode> to <BLC>. 3. Set <BLC level>. You can change the level to adjust the brightness of the monitoring area.
Page 44
setup screen • Sens-up mode : Automatically senses the darkness level at night or in a low contrast scene and extends the accumulation time accordingly for a bright and sharp image. If you set the shutter mode to Manual/A.FLK, SENS-UP mode will be deactivated. ...
Page 45
OSD Setup 1. Select <OSD>. 2. Select each item and set it properly. • Camera title : Specify whether or not to display the camera title on the screen. You can enter up to 15 characters for the title. •...
Page 46
Smart codec setup (SNB-7001) Set a desired area of the video incoming from the camera as ROI area and specify the detection sensitivity for the area. 1. From the Setup menu, select the <Video ( )> tab. 2. Click <Smart codec setup>.
NETWORK SETUP Interface 1. From the Setup menu, select the <Network ( )> tab. 2. Click <Interface>. 3. Set the <Interface> and <IPv6 setup> as necessary. • IP type : Select an IP connection type. - Manual : Specify the IP address, Subnet mask, Gateway, DNS1, and DNS2.
Page 48
The default is 80(TCP). • Device port : Set a port used to transfer video signals with the Samsung protocols. • RTSP port : Used to transfer videos in the RTSP mode; the default is 554.
Page 49
- Password : Enter the password for the DDNS service. (i.e., password that is registered with Dyndns) 5. When done, click [Apply ( Registering with DDNS To register your product with the Samsung DDNS 1. Visit the iPOLiS web site (www.samsungipolis.com) and sign in with a registered account.
Page 50
7. Click [REGISTRATION]. The product will be added to the product list that you can check. To connect to the Samsung DDNS in camera setup 1. From the DDNS setup page, set <DDNS> to <Samsung DDNS>. 2. Provide the <Product ID> that you registered product ID with the DDNS site.
Page 51
IP filtering You can create a list of IPs that you want to grant or deny access to them. 1. From the Setup menu, select the <Network ( )> tab. 2. Click <IP filtering>. 3. Select <Filtering type>. • Deny : If selecting this, access from those IPs that are added to the filtering will be restricted.
Page 52
setup screen You can select a secure connection system or install the public certificate for this purpose. 1. From the Setup menu, select the <Network ( )> tab. 2. Click <SSL>. 3. Select a secure connection system. To access the camera using HTTPS mode, you have to type the IP address for the camera in the form of “https://<Camera_IP>”.
Page 53
802.1x When connecting network, you can choose whether using 802.1x protocol, and then install the certification. 1. From the Setup menu, select the <Network ( )> tab. 2. Click <802.1x>. 3. Set the <IEEE 802.1x Setting(EAPOL using EAP-TLS)>. • Enable IEEE 802.1x : Specify the use of the 802.1x protocol.
Page 54
setup screen You can specify the priority to secure a stable transfer rate for a specific IP. 1. From the Setup menu, select the <Network ( )> tab. 2. Click <QoS>. 3. Click the [Add ( )] button. The IP list will be created. 4.
• Enable SNMP v3 : SNMP version 3 will be active. - Password : Specify the default password for SNMP version 3. The default password is “admin4321”. The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product.
Page 56
setup screen • E-mail configuration - Server address : Enter the IP address of the email server that you transfer the alarm or event images to. - Use authentication : Select whether to use authorization. - Use SSL : Specify the use of SSL. - ID : Enter the user ID for logging into the email server.
Alarm input You can set the alarm input type, activation time, and operation mode. 1. From the Setup menu, select the <Event ( )> tab. 2. Click <Event setup >. 3. Select <Alarm input> from <Event action setup>. 4. Set whether or not to <Enable>. 5.
Page 58
setup screen Time schedule You can configure so that an event will occur at a scheduled time regardless of the actual occurrence of the event. 1. From the Setup menu, select the <Event ( )> tab. 2. Click <Event setup>. 3.
Tampering detection You can set to trigger an event when a scene is changed on the video screen. 1. From the Setup menu, select the <Event ( )> tab. 2. Click <Event setup>. 3. Select <Tampering detection> from <Event action setup>. 4.
setup screen Motion detection 1. From the Setup menu, select the <Event ( )> tab. 2. Click <Event setup >. 3. Select <Motion detection> from <Event action setup>. ❖ Motion Detection 1. Set whether or not to <Enable>. 2. Set the motion detection mode to Mask.
Page 61
If the camera is capturing a short-distant object, the motion detection performance may be degraded. The motion detection function may not work properly in the following cases: - The object color or brightness is similar to the background. - Multiple movements continue occurring at random due to a scene change or other reasons. - A fixed object continues moving in the same position.
setup screen SYSTEM SETUP Product information 1. From the Setup menu, select the <System ( )> tab. 2. Click <Product information>. 3. Check the camera information, or provide details according to your network environment. • Model : Model name of the product. •...
Page 63
• System time setup : Specify the time and date that will be applied to your system. - Manual : Specify the time manually. - Synchronize with NTP server : Sync with the time of the specified server address. - Synchronize with PC viewer : Synchronize the time with the connected PC. 4.
Page 64
It may take a max of 20 minutes for the upgrade process. If you forcibly terminate the upgrade process, upgrade will not be completed properly. You can download the latest version from the Samsung web site (www.samsungcctv.com). 64_ setup screen...
Page 65
To back up the current settings 1. Click [Backup]. The Save As dialog should appear. 2. Specify the backup path with a proper file name, and click [Save]. The backup file will be saved to the specified path in the format of “.bin”. To restore the backup settings 1.
Page 66
setup screen You can check the system log or event log. 1. From the Setup menu, select the <System ( )> tab. 2. Click <Log>. 3. Select a log type. • System : You can check the system logs where any system changes are recorded including the time information.
Page 67
Profile access You can check the profile information. 1. From the Setup menu, select the <System ( )> tab. 2. Click <Profile access>. • Profile access : Show the information of the newly added profile. - Profile : Show the information of the newly added codec.
SPECIFICATION Description Items SNB-5001 SNB-7001 Imaging Device 1/3” 1.3M PS CMOS 1/2.8” 3M PS CMOS Total Pixels 1,384(H) x 1,076(V) 2,144(H) X 1,588(V) Effective Pixels 1,329(H) x 1,049(V) 2,096(H) X 1,561(V) Scanning System Progressive Video Color/B/W : 0.7 Lux (F1.2, Color/ B/W : 0.4 Lux (F1.2,...
Page 69
Description Items SNB-5001 SNB-7001 Camera Title Off / On (Displayed up to 15 characters) Day & Night Auto (S/W) / Color / B/W Backlight Compensation Off / BLC Wide Dynamic Range Contrast Enhancement Digital Noise Reduction SSNR (Off / On)
appendix TROUBLESHOOTING PROBLEM SOLUTION Check to make sure that the camera’s Network settings are appropriate. Check to make sure that all network cables have been connected properly. I can’t access the camera from a If connected using DHCP, verify that the camera is able to acquire web browser.
For more additional information, send email to help.cctv@ 3. All advertising materials mentioning features or use of this samsung.com. software must display the following acknowledgement: This product includes software developed by the Computer Copyright (C) 2004, Kneschke, incremental Science Department at University College London.
License Various copyrights apply to this package, listed in various NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT separate parts below. Please make sure that you read all the OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF parts. THE POSSIBILITY OF SUCH DAMAGE.
Page 77
Neither the name of Cisco, Inc, Beijing University of THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY Posts and Telecommunications, nor the names of their EXPRESS OR IMPLIED WARRANTIES, INCLUDING, contributors may be used to endorse or promote products BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF derived from this software without specific prior written MERCHANTABILITY AND FITNESS FOR A PARTICULAR...
Page 78
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of Apple Inc. (“Apple”) nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged.
Page 80
b) You must cause any work that you distribute or publish, If distribution of executable or object code is made by that in whole or in part contains or is derived from offering access to copy from a designated place, then the Program or any part thereof, to be licensed as a offering equivalent access to copy the source code from the whole at no charge to all third parties under the terms...
Page 81
9. The Free Software Foundation may publish revised and/ one line to give the program’s name and an idea of what it or new versions of the General Public License from time does. to time. Such new versions will be similar in spirit to the Copyright (C)yyyy name of author present version, but may differ in detail to address new problems or concerns.
Page 82
We, the Free Software Foundation, use the GNU General called a “modified version” of the earlier work or a work “based Public License for most of our software; it applies also to any on” the earlier work. other work released this way by its authors. A “covered work”...
Page 83
the stated conditions are met. This License explicitly affirms d) If the work has interactive user interfaces, each must your unlimited permission to run the unmodified Program. display Appropriate Legal Notices; however, if the Program The output from running a covered work is covered by this has interactive interfaces that do not display Appropriate License only if the output, given its content, constitutes a Legal Notices, your work need not make them do so.
Page 84
doubtful cases shall be resolved in favor of coverage. For c) Prohibiting misrepresentation of the origin of that material, a particular product received by a particular user, “normally or requiring that modified versions of such material be used” refers to a typical or common use of that class of marked in reasonable ways as different from the original product, regardless of the status of the particular user or of version;...
Page 85
10. Automatic Licensing of Downstream Recipients. If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring Each time you convey a covered work, the recipient conveyance of, a covered work, and grant a patent license automatically receives a license from the original licensors, to to some of the parties receiving the covered work authorizing run, modify and propagate that work, subject to this License.
Page 86
If the Program specifies that a proxy can decide which future This license, the Lesser General Public License, applies versions of the GNU General Public License can be used, to some specially designated software packages-typically that proxy’s public statement of acceptance of a version libraries-of the Free Software Foundation and other authors permanently authorizes you to choose that version for the who decide to use it.
Page 87
For example, on rare occasions, there may be a special need You may charge a fee for the physical act of transferring a to encourage the widest possible use of a certain library, so copy, and you may at your option offer warranty protection in that it becomes a de-facto standard.
Page 88
If distribution of object code is made by offering access to copy c) Accompany the work with a written offer, valid for at least from a designated place, then offering equivalent access to copy three years, to give the same user the materials specified the source code from the same place satisfies the requirement in Subsection 6a, above, for a charge no more than the to distribute the source code, even though third parties are not...
Page 89
by court order, agreement or otherwise) that contradict NOT LIMITED TO, THE IMPLIED WARRANTIES OF the conditions of this License, they do not excuse MERCHANTABILITY AND FITNESS FOR A PARTICULAR you from the conditions of this License. If you cannot PURPOSE.
Page 90
OpenSSL LICENSE documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with Copyright (c) 1998-2006 The OpenSSL Project. All rights or without modification, are permitted provided that the reserved. Redistribution and use in source and binary forms, following conditions are met: with or without modification, are permitted provided that the 1.
Page 91
Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.
Page 92
SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungcctvusa.com...