Connecting A Pc Or Mac - Marantz PM7005 Owner's Manual

Contents Connections

Connecting a PC or Mac

By connecting a computer to the USB-DAC port on the rear panel of this unit using a commercially available USB connecting cable, this unit can be used
as a D/A converter. (v p. 30)
0 Install the dedicated driver software on the computer to enable communication between the computer and this unit in order to playback high-resolution sound source (DSD
signal or 192 kHz/24 bit PCM signal) audio available on the internet. (v p. 30)
0 Download the driver software from the PM7005 page of the Marantz website.
NOTE
Use a cable that is 3 m or less to connect to the computer.
Front panel Rear panel
Playback
Type A
USB 2.0 cable
(Sold separately)
Computer on which the driver software and audio
Type B
player software are installed
Remote control
unit
Settings
23 Index
Tips Appendix