Samsung OfficeServ ITP-5112L User Manual page 17

OfficeServ 7100
TECHNICAL MANUAL
12 CID REVIEW ALL
13 SECURE OHVA
NOT FOR USA
14
AUTO ANS CO
15
ENBLOCK 2LCD
16
STN NO RING
17
FEATURE TONE
18
RCV GPU INFO
19
MISSED CALLS
20
NO DISP TRK#
21
ACTION
1. Press TRANSFER 110
Display shows
2. Dial the option number from above list
(e.g., 4) OR
Press UP or DOWN to select the option and
Press the RIGHT soft key to move the cursor.
FEATURES
If this setting is set to OFF the CID review
list will only store CID information for calls
that were not answered at the station and
reject the information for calls that were
answered. When set to ON all calls will be
stored in the list.
When set to OFF an OHVA will be heard
through the keyset speaker rather than the
handset.
When set to ON CO lines programmed to
ring that keyset directly will auto answer if
the keyset is programmed for auto answer
in MMC
For ITP Phones with 2 Line Display
Set to ON will require user to press SEND
button to make a call, it works like a cell
phone. Enblock dialing must be enabled in
MMC
When ON all incoming calls will not ring at
stations.
(NOT FOR USE IN US).
Enables members of a pickup group with
"RCV GRP INFO" set to ON, to receive a
short ring burst along with the call info
when another member of the pickup group
receives a call.
When set to ON the station will display
information about missed calls as well as
the ID of the most recent missed calls.
When set to ON, the feature disables the
trunk number from being displayed on
outgoing calls.
1.16
Home Page
DESCRIPTION
103.
861.
DISPLAY
[201] STN ON/OFF
AUTO HOLD
[201] STN ON/OFF
HOT KEYPAD :OFF
Table of Contents
USER INSTRUCTIONS
PART 1 MAY 2009
:OFF