Sanyo LED-22XR10F Service Manual page 16

4.4.3 Signal connection
Signal from adjusted channel to VG848 must be connected normally, if there are several channels for
one kind of signal, the first channel must be connected, for example, AV has three channels AV1, AV2 and
AV3, YPbPr has two channels YPbPr1 and YPbPr2, so AV1 and YPbPr1 must be connected;
4.4.4 Adjusting interface are shown as Fig. 14 and Fig. 15
Connect CA210 after
opening adjustment
system every time
Calibrate zero
after CA210
power on
Fig. 13 Interface of Prima auto white balance adjustment system
Connect TV after
opening adjustment
system every time
Adjusting button
Real
chromatic
coordinates