Sanyo LED-22XR10F Service Manual page 10

4.4.2 Driver and communication setup
4.4.2.1 Special driver must be installed for communication ports of PC and CA210, detailed processes
are described as below:
a) Power on CA210, connect data line normally, a prompting dialog will display as Fig.4 for the
first time of setup;
b) Select item "Setting from list or specified location (advanced)", then press button "Next",
please refer to Fig. 4;
c) Select item "Don't search. I want to install driver by myself (D)", then press button "Next",
please refer to Fig. 5;
Fig.3
Fig.4