DeWalt DC300 Instruction Manual page 12

wool, aluminum foil, or any buildup of metallic particles should
be kept away from charger cavities. Always unplug the charger
from the power supply when there is no battery pack in the cavity.
Unplug charger before attempting to clean.
6. Do not freeze or immerse charger in water or any other liquid.
WARNING: Shock hazard. Don't allow any liquid to get inside
charger. Electric shock may result.
WARNING: Burn hazard. Never attempt to open the battery pack
for any reason. If the plastic housing of the battery pack breaks or
cracks, return to a service center for recycling.
Storage Recommendations
1. The best storage place is one that is cool and dry away from direct
sunlight and excess heat or cold.
2. For long storage, it is recommended to store a fully charged
battery pack in a cool dry place out of the charger for optimal
results.
NOTE: Battery packs should not be stored completely depleted of
charge. The battery pack will need to be recharged before use.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
COMPONENTS (Fig. 2)
WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
A. Switch lock-off button
B. Trigger switch
C. Battery pack
D. Depth adjustment lever
E. Shoe
F. Lower guard retracting lever
G. Lower guard
H. Keyless blade clamp
INTENDED USE
This circular saw is designed for professional wood cutting applications.
DO NOT use under wet conditions or in presence of fl ammable liquids
or gases.
This circular saw is a professional power tool. DO NOT let children
come into contact with the tool. Supervision is required when
inexperienced operators use this tool.
Switch (Fig. 2)
Release switch lock-off button (A) by pressing button. Pull the trigger
switch (B) to turn the motor ON. Releasing the trigger switch turns
the motor OFF. Releasing the trigger switch also automatically
actuates lock-off button.
NOTE: This tool has no provision to lock the switch in the ON
position, and should never be locked ON by any other means.
10
I. Kerf indicator
J. Bevel adjustment lever
K. Adjustment screw
L. Blade lock button
(not shown)
M. Auxilary handle
N. Battery release button