Disabling And Deleting The Mastercode - Weiser Smartcode 10 Programming And Troubleshooting Manual
Weiser smartcode 10 touchscreen electronic deadbolt
Hide thumbs
Also See for Smartcode 10:
- User manual ,
- Installation and user manual (8 pages) ,
- Quick start manual (3 pages)
Table of Contents
Advertisement
F
Disabling and Deleting the Mastercode
1. Keep door open. Press and HOLD the Program button until the
Checkmark symbol illuminates (about 5 seconds).
2. Press Checkmark symbol once.
3. Press Lock symbol once.
4. Enter Mastercode.
USA: 1-800-677-5625
Canada: 1-800-501-9471
www.weiserlock.com
5. Press Lock symbol once.
6. Re-enter Mastercode.
7. Press Lock symbol once.
If programming is successful, the Checkmark will illuminate and you
will hear one beep.
If programming is unsuccessful, the "X" pattern will fl ash three times, and
you will hear three beeps. Make sure the Mastercode has been enabled
before trying to disable it. Attempt the procedure again, making sure to
enter the same Mastercode in step 4 and 6.
8. Make sure switch #3 is on, and press the Program button once. If you
don't immediately hear fi ve beeps and see the Checkmark fl ash fi ve
times, the Mastercode is disabled.
9 / 15
62812 / 01
©2015 Spectrum Brands, Inc.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Smartcode 10 and is the answer not in the manual?
Questions and answers
what would the master code usually be
The Mastercode for the Weiser Smartcode 10 is not set by default. It must be manually enabled and programmed by the user. The Mastercode must be 4 to 8 digits long.
This answer is automatically generated