Using Passwords - Lenovo ThinkServer TD230 Hardware Maintenance Manual

Table 28. Items under the Server Management menu (continued)
Item
FRB-2 Enable
OS Boot Watchdog Timer
OS Boot Watchdog Timer Policy
OS Boot Watchdog Timer Timeout
Plug & Play BMC Detection
ACPI 1.0 Support
Console Redirection
System Information
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 29. Items under the Boot Options menu
System Boot Timeout
Boot Option #1
Boot Option #2
Boot Option #3
Boot Option #4
Network Device Order
Delete Boot Option
EFI Optimized Boot
Boot Option Retry
Note: The settings in [ ] are the default settings in the Setup Utility program.
Exiting the Setup Utility program
After you finish viewing or changing settings, press Esc to return to the Setup Utility program main menu.
You might have to press Esc several times. Then, you can do one of the following:
• If you want to save the new settings and exit the Setup Utility program, press F10. Otherwise, your
changes will not be saved.
• If you do not want to save the new settings, select Exit ➙ Discard Changes and Exit.
• If you want to return to the default settings, press F9 or select Exit ➙ Load Default Values.

Using passwords

By using the Setup Utility program, you can set a password to prevent unauthorized access to your server
and data. The following options are available to help you set an administrator password or a user password:
• Set Administrator Password
• Set User Password
You do not have to set a password to use your server. However, using a password improves computing
security. If you decide to set a password, read the following sections.
[Disabled] / Enabled
[Disabled] / Enabled
[power off]
[10 minutes]
[Disabled] / Enabled
[Disabled] / Enabled
[Disabled] / Serial Port A / Serial Port
B
Item
Option
Default. Cannot be modified.
Default. Cannot be modified.
View the system information.
[0]
Use this option to set the first boot device.
Use this option to set the second boot device.
Use this option to set the third boot device.
Use this option to set the fourth boot device.
Use this option to set the network device boot sequence.
Delete boot options.
[Disabled] / Enabled
[Disabled] / Enabled
Chapter 7
Description
Option
.
Configuring the server
149