Lenovo ThinkServer TD230 Hardware Maintenance Manual page 109

Machine types: 1027, 1029, 1039, and 1040
Table of Contents

Advertisement

6. The front fan is attached to the chassis by four rubber mounts
rubber mounts and gently pulling the front fan out of the chassis.
Figure 69. Removing the front fan
7. Reinstall all hard disk drives. See "Installing a hot-swap hard disk drive" on page 60 or "Installing a
non-hot-swap hard disk drive" on page 68.
8. If you are instructed to return the removed front fan to the manufacturer, follow all packaging instructions
and use any packaging materials that are supplied to you for shipping.
9. To complete the removal procedure, go to "Completing the parts replacement" on page 122.
Installing a front fan
Attention:
Do not open your server or attempt any repair before reading and understanding the Safety Information and the
Warranty and Support Information on the ThinkServer Documentation DVD that came with your product, and
"Guidelines" on page 39. To obtain a copy of the publications, go to:
http://www.lenovo.com/support
This section provides instructions on how to install a front fan.
1
. Remove the front fan by cutting the
.
Chapter 5
Replacing FRUs
103

Advertisement

Table of Contents
loading

Table of Contents