Upper Block Disassembly - Nokia N92 RM-100 Service Manual

CMO Operations & Logistics
Training and Vendor Development
Multimedia Creation & Support
10.

UPPER BLOCK DISASSEMBLY

1. Needed tools: The SRT-6, the SS-93, metal tweezers, dental
pick, a torque driver with a Torx plus size 6 bit, the SS-45
camera removal tool, and a Torx plus driver size 6.
3. Ensure that no battery is inserted before going on.
5. Now release the clips of the Hinge Cover B.
Service Manual N92 RM-100
Page 13 (53)
CONFIDENTIAL
2. Cover all windows with a protective film.
4. Release the clips of the Hinge Cover A from the top side first.
6. Bring the assembly into position shown and remove the
Hinge Cover.
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 1.0
MGR
17.Okt.2006