NME–3 PAMS Mechanical Parts Assembly Instructions Technical Documentation Handset – Assembly Instructions WEAR GLOVES DURING THE NOTE: ENTIRE ASSEMBLY PROCESS B – COVER SUB ASSEMBLY • B – cover (3) and A – cover to assembly jig • Press mic. Boot assy (9) into B–cover (3) NOTE: SPEAKER ASSY IS ULTRASONIC WELDED TO THE B–COVER Issue 1 10/99...
Page 5
NME–3 PAMS Technical Documentation Mechanical Parts Assembly Instructions A – COVER PRE ASSEMBLY CODING PINS • Power key (6) to A – cover (ensure, that both coding pins fit into the power key) • Keymat (5) to A – cover (do not touch contact area) •...
Page 6
NME–3 PAMS Mechanical Parts Assembly Instructions Technical Documentation FINAL ASSEMBLY • Fit the bottom side of the B – cover (3) to the A – cover (2) • Press B – cover to A – cover until it snaps home firmly.
Page 7
NME–3 PAMS Technical Documentation Mechanical Parts Assembly Instructions • Turn unit over to the keymat side • 2 screws (13) trough A – cover into B – cover domes (400 rpm, 30Ncm) • Verify that A – and B – cover are properly closed by checking that the gap between them is constant all arround the Handset •...
Page 8
NME–3 PAMS Mechanical Parts Assembly Instructions Technical Documentation • Fit SIM – door (4) to the B – cover (till it firmly snap) • Place type label to B – cover • Pull OEM – logo (7) from the roll and stick it to the A –...
NME–3 PAMS Mechanical Parts Assembly Instructions Technical Documentation Radio Unit – Assembly Instructions PCB Complete Guiding Pin Guiding Pin Bottom Enclosure Level 0 Operation: Mount PCB in Bottom Enclosure To check: 1. check that cutting rest is not bigger than 0.2mm 2.
Page 11
NME–3 PAMS Technical Documentation Mechanical Parts Assembly Instructions Screw M3x8 Bottom Enclosure Level 2 Operation: Fasten PCB and PA with 2 screws in the numbered order : 4+5 (torque : 63 Ncm; speed 400–1200 rpm) Top Shield Assy Bottom Enclosure Level 3 Operation: 1.
Page 12
NME–3 PAMS Mechanical Parts Assembly Instructions Technical Documentation Top Enclosure Assy rotate into snaps Sealing Label assemble ribs 3 recesses SIM Guidance Type Label Level 4 Operation: (in Order) 1. Assemble SIM Guidance to Bottom Enclosure by jig. 2. Add the sealing label 3.
NME–3 PAMS Technical Documentation Mechanical Parts Assembly Instructions Cradle –Mechanical Parts List Item Part Description NMP Code A COVER 9451519 B COVER 9451520 PUSH – RIGHT 9451504 PUSH – LEFT 9451522 SPRING PUSH 6400063 SLIDER 9460309 SPRING SLIDER 6400109 HOOK – RIGHT 9451501 HOOK –...
Page 14
NME–3 PAMS Mechanical Parts Assembly Instructions Technical Documentation [This page intentionally left blank] Issue 1 10/99 Page 14...