Table of Contents
Advertisement
8-6. Changing Engine Oil, Oil Filter, and Fuel Filter
2
3
Oil Fill
Tools Needed:
.
Complete Parts List is available at www.MillerWelds.com
1
!
Stop engine and let cool.
1
Oil Drain Valve
Change engine oil and filter accord-
ing to engine owner's manual.
NOTICE − Close valve and valve
cap before adding oil and running
engine.
Fill crankcase with new oil to full
mark on dipstick (see Section 8-1).
2
Fuel Filter
3
Fuel Line
Replace line if cracked or worn.
Install new filter with arrow pointing
in the direction of fuel flow. Wipe up
any spilled fuel.
Start engine, and check for fuel
leaks.
!
Stop engine, tighten connec-
tions as necessary, and wipe
up fuel.
Reset oil maintenance countdown
by leaving the engine off and flip-
ping Engine Control switch from
Auto Speed to Run three times.
Oil Check
Full
OM-249 795 Page 43
250 916-A
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Trailblazer 325 and is the answer not in the manual?
Questions and answers
new to my current job and this industry period, im working on a miller trailblazer 325 diesel. oil change intervals are usually set at 200hrs for some reason reason on this one its only resetting to 100hrs instead of 200. is there a way to change it from 100 to 200? thanks in advance