System settings
1 Display the screen you wish to adjust.
2 Display the "System" setting screen.
Displaying the "System" setting screen on page 32
3 Touch [Picture Adjustment].
4 Touch the item to select the function to be
adjusted.
●
Brightness:
Adjusts the black intensity. (–24 to +24)
●
Contrast:
Adjusts the contrast. (–24 to +24)
●
Color:
Adjusts the color saturation. (–24 to +24)
●
Hue:
Adjusts the tone of color (which color is emphasized, red or
green). (–24 to +24)
●
Dimmer:
Adjusts the brightness of the display. (+1 to +48)
●
Temperature:
Adjusts the color temperature, resulting in a better white
balance. (–3 to +3)
# With some pictures, you cannot adjust Hue and
Color.
# When you touch [Rear View], the mode changes
to the selected camera mode. By touching
[Source], [Navi] or [Apps], you can return to the
selected mode.
5 Touch
,
,
,
to adjust.
# The adjustments of "Brightness", "Contrast"
and "Dimmer" are stored separately when your
vehicle's headlights are off (daytime) and on
(nighttime).
# "Brightness" and "Contrast" are switched auto-
matically depending on whether the vehicle's
headlights are on or off.
# "Dimmer" can be changed the setting or the time
to switch it to on or off.
Setting the dimmer on page 33
# The picture adjustment may not be available with
some rear view cameras.
# The setting contents can be memorized
separately.
34
Displaying the firmware
version
1 Display the "System" setting screen.
Displaying the "System" setting screen on page 32
2 Touch [System Information].
3 Touch [Firmware Information].
The "Firmware Information" screen appears.
Updating firmware
CAUTION
●
The USB storage device for updating must contain only the
correct update file.
●
Never turn this product off, disconnect the USB storage
device while the firmware is being updated.
●
You can only update the firmware when the vehicle is
stopped and the parking brake is engaged.
1 Download the firmware update files.
2 Connect a blank (formatted) USB storage
device to your computer, and then locate the
correct update file and copy it onto the USB
storage device.
3 Connect the USB storage device to this
product.
4 Turn the source off.
Selecting a source on page 10
5 Display the "System" setting screen.
Displaying the "Audio" setting screen on page 34
6 Touch [System Information].
7 Touch [Firmware Update].
8 Touch [Continue] to display the data transfer
mode.
p Follow the on-screen instructions to finish updating the
firmware.
p This product will reset automatically after the firmware
update is completed if the update is successful.
p If an error message appears on the screen, touch the display
and perform the above steps again.
Audio
adjustments
Displaying the "Audio" setting
screen
1 Press
.
2 Touch
, and then
.
The "Audio" setting screen appears.
Using fader adjustment
1 Display the "Audio" setting screen.
Displaying the "Audio" setting screen on page 34
2 Touch [Fader].
3 Touch
or
to adjust the front/rear speaker
balance.
p "Front25" to "Rear25" is displayed as the front/rear speaker
balance moves from the front to rear.
p The default setting is "F/R 0".
p Set "Front" and "Rear" to "0" when using a dual speaker
system.
# You can also set the fader/balance by dragging
the point on the displayed table.
Using balance adjustment
p This function is available when "Standard Mode" is selected
as the speaker mode.
1 Display the "Audio" setting screen.
Displaying the "Audio" setting screen on page 34
2 Touch [Balance].
3 Touch
or
to adjust the left/right speaker
balance.
p "Left25" to "Right25" is displayed as the left/right speaker
balance moves from the left to right.
p The default setting is "L/R 0".
# You can also set the fader/balance by dragging
the point on the displayed table.