Displaying The Firmware Version; Updating Firmware; Checking The Connections Of Leads - Pioneer SPH-DA120 Operation Manual

System settings
Displaying the firmware
version
1 Touch the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The "System" screen appears.
3 Touch [System Information].
4 Touch [Firmware Information].
The "Firmware Information" screen appear-
s.

Updating firmware

CAUTION
! The only USB port that supports the firmware
update is USB port 1.
! Never turn this product off or disconnect the
USB storage device while the firmware is
being updated.
! You can only update the firmware when the ve-
hicle is stopped and the parking brake is en-
gaged.
1 Download the firmware update files.
2 Connect a USB storage device to your
computer, and then locate the correct up-
date file and copy it onto the USB storage
device.
3 Turn the source off.
= For details, refer to Turning off the AV source
on page 13.
4 Touch the HOME button to display the
Top menu screen.
5 Touch the following keys in the follow-
ing order.
The "System" screen appears.
6 Touch [System Information].
7 Touch [Firmware Update].
The "Firmware Update" screen appears.
8 Touch [Continue] to display the data
transfer mode.
p Follow the on-screen instructions to finish
updating the firmware.
p This product will reset automatically after
the firmware update is completed if the up-
date is successful.
p When the firmware update starts, the
source is turned off and the Bluetooth con-
nection is disconnected.
p If an error message appears on the screen,
touch [Continue] to proceed and start the
recovery sequence.
Checking the connections
of leads
Check that the leads are properly connected
between this product and vehicle.
1 Touch the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The "System" screen appears.
3 Touch [System Information].
4 Touch [Connection Status].
The "Connection Status" screen appears.
Chapter
18
83
En