Sony Trimaster EL BVM-E250 Operation Manual page 54

Menu
File
User LUT
File
Color Space
Gamma
Marker Preset
H Shift Offset
Channel Name
NTSC Setup Level
Component Level
Betacam Setup Level
54
Channel Configuration Menu
Function and operation ([
Selects the ASC CDL data.
You can select from among [Internal Memory 1], Internal Memory 2, Internal Memory 3,
Internal Memory 4 and Internal Memory 5.
Notes
• When an ASC CDL data file is loaded using Load ASC CDL (page 57) in the ASC CDL
menu of the Auxiliary Setting menu, the file name is displayed instead of Internal Memory 1
to Internal Memory 5.
• When the ASC CDL data is modified, an "*" is displayed at the end of Internal Memory 1 to
Internal Memory 5 or the file name (Example: Internal Memory 1*).
Sets whether or not to apply the User LUT data for the Color Profile setting.
[Not Applied]: The User LUT data is not applied.
Applied: The User LUT data is applied.
Notes
• This item is disabled when there is no User LUT data to be applied.
• When the User LUT data selected with the File menu is deleted using Delete LUT (page
58) in the User LUT menu of the Auxiliary Setting menu, the setting for this item is
automatically switched from Applied to Not Applied.
Selects the User LUT data.
When the item is selected, the LUT data loaded using Load LUT (page 58) in the User LUT
menu of the Auxiliary Setting menu are displayed. Select a file name from among the
displayed ones. [-- (no setting) ]
Displays the Color Space setting specified in the loaded LUT data file.
Displays the Gamma setting specified in the loaded LUT data file.
Sets the marker preset data.
You can select from Marker1 to Marker5. [Marker1]
For setting the marker, see the Marker Setting menu (page 59) of the Function Setting menu.
Sets the horizontal picture position when the analog signal is input.
You can select when Format is set to Composite Auto, Composite NTSC, Composite PAL,
Composite PAL-M, Composite SECAM, YC Auto, YC NTSC, YC PAL, YC PAL-M, YC
SECAM, Component YPbPr or Component RGB.
1)
Set to –100 to +100 . [000]
1) When the setting value is out of range, the display of the setting value is changed but the horizontal position
of the picture is not changed.
To hide the characters on the monitor during adjustment
Set the CHAR OFF button of the controller to on. As the characters on the display are
hidden, it becomes easy to adjust the picture. To display the characters, set the CHAR OFF
button to off.
Sets a channel name.
When the item is selected, you can select a preset name, or enter a new one.
PROG: Program signal
EDIT: Signal from an editor
CAM: Camera signal
VTR: Signal from a VTR
PREV: Preview monitor
New Name: Enter a new name. (Up to 20 characters can be entered.)
Sets the NTSC setup level.
You can select when Format is set to Composite Auto, Composite NTSC, YC Auto or YC
NTSC.
You can select from 0% or 7.5%.
Sets the component level of the analog component 480/60i signal.
You can select when Format is set to Component YPbPr.
You can select from SMPTE/EBU-N10 or Betacam.
Sets the Betacam setup level when Component Level is set to Betacam.
You can select from 0% or 7.5%.
]: factory setting)