Sony Trimaster EL BVM-E250 Operation Manual page 35

When selecting in setting mode
1
Using the UP or DOWN button or PHASE knob, select
the desired item and press the ENTER or Ent button.
The cursor moves to the setting value and the monitor
enters in setting mode.
Display example
iChannel Configuration
CH01
B
Format
xxxxx
Input Port:
xxxxx
Input No:
B
Screen Aspect
xxx
Sync Mode:
xxx
Color Temp:
xxxxx
Picture Preset:
B
Matrix
B
Color Profile
Set: ENTER Cancel: MENU
2
Using the UP or DOWN button or PHASE knob, select
the setting value.
3
Press the ENTER or Ent button.
The setting is confirmed and the cursor returns to the
item.
When selecting from the setting list
1
Using the UP or DOWN button or PHASE knob, select
the desired item in the setting list.
Display example
iiiParallel Remote
1 Pin
CH: 01
---
Under Scan
Over Scan
Native Scan
16 : 9
H Delay
V Delay
External Sync
Comb
2
Press the ENTER or Ent button.
The setting is confirmed and the display returns to the
menu of the upper level.
Entering numerical values
1
Using the UP or DOWN button or PHASE knob, select
the desired item and press the ENTER or Ent button.
v
1/3
V
Cursor
2
3
Entering characters
1
v
1/5
V
2
3
The cursor moves to the setting value and the monitor
enters in setting mode.
Display example
iChannel Configuration
CH01
xxxxx
Marker Preset
xxx
H Shift Offset:
B
Channel Name
xx
NTSC Setup Level::
xxxxx
Component Level:
xxx
Betacam Setup Level::
B
RGB Range:
B
1080I/PsF
xxx
Film Cadence::
Set: ENTER Cancel: MENU
Select the value in one of the following three ways:
• Enter the value directly using the numeric buttons
and press the ENTER or Ent button. (only the item
whose the value of setting range is over 0)
• Select the value using the UP or DOWN button.
• Select the value using the PHASE knob.
Press the ENTER or Ent button.
The setting is confirmed and the cursor returns to the
item.
Using the UP or DOWN button or PHASE knob, select
New Name or the existing name.
The "---" means that one or more characters can be
entered in sequence after the existing name.
Press the ENTER or Ent button.
Using the UP or DOWN button or PHASE knob, select
the characters that you wish to enter.
Display example
iiChannel Name
CH01
PROG___
EDIT___
CAM___
VTR___
PREV___
New Name
v
2/3
V
35
Basic Menu Operations