Table of Contents
Advertisement
433MHz RECEPTION CHECK FOR OUTDOOR TEMPERATURE
TRANSMITTER
The atomic clock will receive the temperature data within 10 minutes. If the temperature data
is not received 10 minutes after setting up (the display shows "- - -"), then please check the
following points:
1.
The distance of the atomic clock or outdoor temperature transmitter should be at least 6
feet away from any interfering sources such as computer monitors or TV sets.
2.
Avoid placing the receiver onto or in the immediate proximity of metal window frames.
3.
Using other electrical products such as headphones or speakers operating on the same
signal frequency (433MHz) may prevent correct signal transmission and reception.
4.
Neighbors using electrical devices operating on the 433MHz signal frequency can also
cause interference.
Note:
When the 433 MHz signal is received correctly, do not re-open the battery cover of either the
outdoor temperature transmitter or atomic clock, as the batteries may spring free from the
contacts and force a false reset. Should this happen accidentally then reset all units (see
Setting up above) otherwise transmission problems may occur.
The maximum transmission range is
atomic clock (in open space). However, this depends on the surrounding environment and
interference levels. If no reception is possible despite the observation of these factors, all
system units have to be reset (see Setting up). See our website www.skyscaninfo.com for
more information.
CHANGING THE DISPLAY MODE (DAY, SECONDS, AND TEMPERATURES)
There are four possible display modes to view the day, seconds, and temperatures.
The month&date/weekday/indoor temperature/outdoor temperature is the default.
To change the display:
1.
Press the + key. The display should now show the
month&date/weekday/seconds/outdoor temperature.
2.
Press the + key a second time and the display will now show the
month&date/weekday/indoor temperature/seconds.
3.
Press the + key third time and the display will now show the
month&date/seconds/indoor temperature/outdoor temperature
4.
Press the + key a fourth time and the display will return to the default display.
200 feet
from the outdoor temperature transmitter to the
10
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 87700 and is the answer not in the manual?
Questions and answers
How do I set the time zone one a 87700 clock. The time keeps changing during the day. Instead of 1:29 it shows 7:29
To set the time zone on a SkyScan 87700 clock, press the "Time Zone" button until you reach the desired time zone setting. Then, press the "Set" button to confirm and save the new setting.
This answer is automatically generated
How do I get the time off military time?
To set the time to Central Standard Time on a SkyScan 87700:
1. Press the "Time Zone" button until you reach the Central Time Zone setting.
2. Press the "Set" button to confirm and save the setting.
3. Adjust the hours and minutes using the "+" and "-" buttons to match the correct time.
This answer is automatically generated