SkyScan 28600 Setup Instructions
  1. Manuals
  2. Brands
  3. SkyScan Manuals
  4. Clock
  5. 28600
  6. Setup instructions

SkyScan 28600 Setup Instructions

Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

Model 28600

Quick set up instructions:

Welcome to the world of radio controlled timekeeping technology. We hope you will
enjoy the convenience of never having to set your clock again and the confidence of
knowing exactly what time it is.
Insert 1 fresh AA, LR6 1.5 volt ALKALINE battery according to the polarity marked on
the case
Place the clock in a window overnight with the face of the clock pointing toward
Colorado. Allow the clock to set itself to Pacific time before pressing any buttons. If the
clock does not set overnight, allow it another night to set itself. Poor weather or
atmospheric disturbance can interfere with the clock picking up the signal.
If you do not live in the Pacific time zone, then press the button to select your time zone.
THAT'S IT!

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 28600 and is the answer not in the manual?

Questions and answers

Related Manuals for SkyScan 28600

Summary of Contents for SkyScan 28600

  • Page 1 Model 28600 Quick set up instructions: Welcome to the world of radio controlled timekeeping technology. We hope you will enjoy the convenience of never having to set your clock again and the confidence of knowing exactly what time it is.
  • Page 2 Fort Collins overnight. Through the radio signals, Skyscan radio controlled clocks always keep precise time. The changeover from standard time to daylight savings time, and vice versa, takes place automatically with the same precision.
  • Page 3 Additional details: To set up your clock simply install one fresh AA, LR6 ALKALINE battery. Due to the nature of long wave radio signals it is normally not possible to receive a signal during the day so it is best to install the battery late in the evening. Select your time zone by pressing one of the four time zone buttons PT-Pacific Time MT-Mountain Time...
  • Page 4 Set the time using the Manual Time Set button: In some cases, the Skyscan clock may not receive the WWVB signal due to atmospheric disturbances or hard to reach locations such as inside malls. In this case, please use the Manual Time Set button, located at the back of the clock to manually set the time.
  • Page 5 If the clock receives a clear signal it will set itself perfectly. If it does not receive a signal consider the following: Battery - The Skyscan clock must have a fresh battery to receive and process the time signal.
  • Page 6 Frequently Asked Questions Q. How long will the battery last? A. A good AA alkaline battery will last over one year. If your clock is located in an area with little interference where it can quickly receive a signal the battery will last much longer than one year.

Table of Contents

Save PDF