To Switch Between Calls; Call Transferring And Conferencing; Conferencing Calls; To Conference Two Calls - NEC DT700 User Manual

3
4
5
Figure 4.29 Hold key

To switch between calls

•
Figure 4.30 Shuttle Calls

To conference two calls

1
Figure 4.31 Conf key on DT710 (ITL-2E) phone
DT700 User Manual
Press the Dial Soft Key to initiate the call, or wait a few seconds for the call to be
automatically dialed.
The call proceeds to the dialed party.
When you have completed the call, press the EndCall Soft Key or press the switch hook
to end the call and return to your original call.
Press the Hold key or the Resume Soft Key to resume the original call.
C O N C U R R E N T C A L L S H U T T L E
Using the Shuttle Soft Key, you can switch between two concurrent calls.
Press the Shuttle Soft Key to switch between the calls.
C A L L T R A N S F E R R I N G A N D C O N F E R E N C I N G
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C O N F E R E N C I N G C A L L S
The DT700 phones support 3 party conferencing.
While on a call, press the Conf key, or press the Conf or Conference Soft Key.
B A S I C P H O N E O P E R A T I O N

Call Transferring and Conferencing

4-63