To Connect Lan Cable To The Phone - NEC DT700 User Manual

Figure 2.8

To connect LAN cable to the phone

1
2
Figure 2.9
3
DT700 User Manual
Handset Connection
Phone
You will need a 10 BASE-T/100 BASE-T/TX LAN cable (Straight) to connect the
phone to your network.
Connect the 10 BASE-T/100 BASE-T/TX LAN cable to the LAN port on the DT700 phone
and to an open port on a device such as a Hub or PoE (Power Over Ethernet) switch on
the local area network.
Thread the LAN cable through the groove on the back of the phone.
Phone/LAN Connection
Phone
LAN Straight
Cable
If you have not connected the DT700 phone to a PoE jack, connect the AC/DC adapter to
the phone as shown below to supply power to the Power Over Ethernet phone.
I N S T A L L A T I O N
Modular
Plug
Coiled Cord
Groove
HANDSET
Connector
To LAN
To PC
Groove
2-29