To Add A Programmable Key As A Speed Dial Key With A Personal Directory Entry Using The Feature Key - NEC DT700 User Manual

To add a Programmable Key as a Speed Dial Key
with a Personal Directory entry using the Feature Key
1
Figure 5.114 Feature Key
2
Figure 5.115 Programmable Key LED
3
Figure 5.116 Speed Dial Name Screen
4
5-120
A D V A N C E D P H O N E F E A T U R E S
Speed Dial and Programmable Keys
Directory entry, or set it up using the Feature Key and select to show the entry in the
Personal Directory.
The Speed Dial information will be listed in the Personal Directory similar to all other
Personal Directory entries, and you can also view the entry information using the
Feature Key.
Press the Feature key. The Feature key LED lights a steady red.
Press the programmable key that you want to set as a Speed Dial Key. The
programmable key LED flashes.
If the Speed Dial has already been programmed, the name and number
Note:
information displays. You will need to press the Exit Soft Key and select
another programmable key.
Use the telephone keypad to enter the name and press Enter
OK Soft Key.
Up to 24 characters may be entered for the name.
• Press the Delete Soft Key to delete the last character entered, or press the
Cancel Soft Key to return to the previous screen.
• To switch between first letter uppercase, all uppercase, all lowercase and
numbers for keypad entry, press the
• To add a space to an entry, press
• To enter special characters, press the
For a list of special characters, see "Speed Dial and Personal Directory
Character Sets" on page 5-145.
• To move the cursor position in the LCD screen, use the right and left cursor pad
keys.
Use the telephone keypad to enter a phone number for the entry and press Enter
the cursor pad or the OK Soft Key.
b
on the cursor pad or the
*
key on the keypad.
#
.
1
key.
b
on
DT700 User Manual