Table of Contents
Advertisement
In addition to the three usual methods of forwarding described above, a fourth
option called Follow Me is available. This option allows a station user to set a
Forward All condition from his/her station to another station while at the remote
station. To display the Follow Me condition, the TRSF key lights steady red at the
station that is forwarded. The TRSF key also lights if Forward All is set and no key
is programmed for Forward All.
Keyset users can be given an external call forward button to forward their calls to
an external phone number. Each outside line may be programmed to either follow
or ignore station call forwarding. A per-station option controls whether internal calls
forward to voice mail or not. Single line telephones must have the system adminis-
trator program this feature for them.
CALL LOG
With the call log feature, a display keyset user can review the last five (5) external
telephone numbers that were dialed. The numbers can be viewed and/or dialed
using the associated soft keys.
CALL PICKUP
With directed call pickup, a user can answer calls ringing at any station by dialing a
code plus that extension number. The group pickup feature allows the user to an-
swer any call ringing within a pickup group. Pickup keys may be customized with
extenders to allow pickup from a specific station or pickup group. The DCS 400si
has 20 programmable pickup groups.
DIRECT STATION SELECTION (DSS)
Programmable keys can be assigned as DSS keys and associated with extension
numbers. Users press these keys to call or transfer calls to the assigned stations.
DO NOT DISTURB (PROGRAMMABLE)
The Do Not Disturb (DND) feature is used to stop all calls to a station. System
programming can allow or deny use of the DND feature for each station. Parties
calling a station in DND will receive reorder tone. When in DND mode, calls may be
forwarded to another destination.
DND button can activate DND via the feature access code. The ANS/RLS key will
flash at 112 ipm (rapidly) when DND is set. There is a programmable option to allow
a C.O. line to override DND at its ring destination if that destination is a single
station.
DOOR LOCK RELEASE
Stations programmed to receive calls from a door phone can dial a code to activate
a contact closure for control of a customer-provided electronic door lock.
EXCLUSIVE HOLD
Pressing HOLD twice will hold a call exclusively at a station so no other station can
pick up that call. Intercom calls are automatically placed on exclusive hold.
See Forward DND
option. A keyset without a
4.2.3
CONTENTS
Advertisement
Table of Contents
