Samsung DCS 400SI User Manual page 45

Hide thumbs Also See for DCS 400SI:
Table of Contents

Advertisement

POWER FAILURE TRANSFER
The DCS 400si cabinet can be equipped with the 16 circuit power fail relay transfer
unit (DPFT). If power fails, these relays can be used to reroute the C.O. lines on the
card to single line telephones. When power is restored to the system, the lines and
stations return to normal operation and calls in progress will be disconnected.
PRIME LINE SELECTION
Any station can be programmed to automatically select a specific line, trunk group,
telephone number, station or station group when the handset is lifted or the speaker
key is pressed (same as Hot Line feature).
PRIVATE LINES
For private line use, stations can be prevented from dialing and/or answering any
line.
PROGRAMMABLE LINE PRIVACY
Each outside line can be programmed to ignore the automatic line privacy. This
allows up to four other parties to join your conversation by simply pressing the line
button. This is similar to 1A2 key telephone operation.
PROGRAMMABLE TIMERS
There are over 50 programmable system timers to allow each installation to be
customized to best fit the end user's application.
RECALLS
Calls put on hold, transferred or camped-on to any station will recall to the originat-
ing station if not answered within a programmable time. A recall that goes unan-
swered for the duration of the attendant recall timer will recall to the system opera-
tor group. Hold, transfer, camp-on and attendant recalls have individual program-
mable timers. Calls recalling to buttons with tri-colored LEDs will flash amber.
REMOTE PROGRAMMING—PC
Remote programming allows the technician to access the system database from a
remote location for the purpose of making changes to the customer data. Cus-
tomer-provided modems and a PC using an optional software package will be needed
to implement this feature.
RING MODES
TIME BASED ROUTING – PLANS
Each C.O. line can be programmed to ring at any station or station group. Each line
can be assigned a ring destination based on six (6) different ring plans based on
time of day and the day of the week.
4.1.17
CONTENTS

Advertisement

Table of Contents
loading

Table of Contents