Panasonic KX-NCP500 Feature Manual page 300

14.1.2 Quick Setup
Item
Set ICD groups as
DIL destination for
individual CO lines
DHCP Client
LAN Connection
*2
Virtual Card
*1 This setting is displayed only if an ELCOT/LCOT card is already installed when Quick Setup is performed.
*2 If the DHCP Client setting is set to Enable, this parameter can not be set.
Note that the programmable items may vary depending on the version of Maintenance Console being used.
300 Feature Manual
Parameter
Yes/No
*1
Enable/Disable
•
IP Address for MPR
Card
•
IP Address for
VoIP-DSP
•
Subnet Mask
•
Default Gateway
–
Description
Selecting Yes configures the settings of the ELCOT/
LCOT card and ICD groups as follows:
•
The floating extension number of each ICD group is
assigned sequentially to the DIL destination of each
port of the LCOT card.
→
12.2 [10-2] DIL Table & Port
Settings—DIL—
Lunch, Break, Night
•
The first 32 extensions are assigned as members
of every ICD group.
→
5.13 [3-5-1] Incoming Call Distribution
Group—Group Settings—Member List
•
Group Call Waiting Distribution is enabled for each
ICD group.
→
5.12 [3-5-1] Incoming Call Distribution
Group—Group Settings—Main—
Waiting Distribution
The effect of these settings is that calls arriving on
different CO lines simultaneously will cause
corresponding S-CO buttons on PTs to light. This
configuration is useful in situations such as in a general
office. When features such as ICD Group Queuing are
required, such as in a call center, select No.
Determines whether to use a DHCP server to assign IP
address information automatically or not.
Manually enter the LAN information when not using a
DHCP server.
Select whether to install a V-IPEXT, V-SIPEXT, or
V-SIPGW card.
DIL Destination—Day,
Call
Document Version 2013-05