Ps-Feature Buttons; Ps-Ring Group - Panasonic KX-NCP500 Feature Manual

13.1.31 PS—Ring Group
Directory Type
PBX Extension
Dialing Directory
PC Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings—Main—
6.10 [4-2-1] Portable Station—Extension Settings—Main—
8.1 [6-1] System Speed Dial
→ Name
→ CO Line Access Number + Telephone Number
PT Programming Manual References
[001] System Speed Dialing Number
[002] System Speed Dialing Name
[004] Extension Name
13.1.30 PS—Feature Buttons
Description
Although a portable station (PS) does not feature as many buttons as a proprietary telephone (PT), a PS can
be customized to give a PS user access to PBX features, just as the flexible buttons on a PT can be customized.
(® 6.1.3 Flexible Buttons)
13.1.31 PS—Ring Group
Description
A PS ring group is a way for several portable stations (PSs) to be notified of an incoming call simultaneously,
while using only one channel of a cell station (CS).
Normally when a PS receives a call, one channel of a CS is used to ring the PS (® 13.1.27 PS (Portable
Station)). If several PSs are members of an incoming call distribution (ICD) group, the available channels of a
CS will become busy just by ringing each PS. Assigning a group of PSs to a PS ring group alleviates this strain
on the CS because only one channel is needed to ring a PS ring group's members.
PS ring group members and related parameters are assigned through system programming, as explained
below.
a.
Floating Extension Number: When this number is called, all PSs in the group ring.
b.
Group Name: Can be displayed on a ringing PS to indicate that the incoming CO line call is a group call,
and not a call directed to the PS's extension number. This is only available when Incoming CO Line Call
Information Display is set to "Called Number".
c.
Incoming CO Line Call Information Display: Determines which information is shown on the PS display
when a group call is received. Select "Caller ID" to display the caller's telephone number or name, or
"Called Number" to display the name of the PS ring group which is receiving the call.
d.
Member PSs: Select each PS that will be a member of the corresponding PS ring group. Note that a PS
can belong to more than one PS ring group.
290 Feature Manual
Description
A system-wide list of extension names. Used to make
a call to one of the stored extensions.
Programming
Stored in the PBX.
Extension Name
Extension Name
Document Version 2013-05