Mamiya ZD Setup Manual

English
●
This setup guide illustrates how to use this product with the most
basic settings.
●
The reverse side illustrates how to develop the photographed
images by uploading the images onto the computer using the
attached photo developing software.
●
Refer to the User's Manual for details.
1
What's in the box?
Take the camera and accessories out of the box and check that all items are included.
NOTE The memory card (SD memory card or compact flash card) that allows the
storage of photographed images is sold separately.
• Eye cup AE301
• Correcting lens standard DE301
• Finder screen type A SA301
• IR Cut filter YB301
• Body front cap KV401
• Battery charger DE-975A User's Manual
• Lithium ion battery BA701 User's Manual
• IR Cut filter/Low Pass filter User's Manual
Mamiya ZD Camera
• Neck strap CN301
• IEEE1394 cable BL301
Battery charger DE-975A Lithium ion battery BA701
Power cord
Mamiya Digital PhotoStudioBS301
(RAW Data development software)
IR Cut filter case Filter replacement guide
s Manual for details. ual
● This setup guide illustrates how to use this product with the most
basic settings.
● The reverse side illustrates how to develop the photographed
images by uploading the images onto the computer using the User's Man
attached photo developing software.
● Refer to the User'
Mamiya ZD Mamiya Digital PhotoStudio Mamiya ZD
Setup Guide (this document) User's Manual User's Manual
2
Names of parts
Strobe light adjustment and correction
LCD monitor
button / Cancel button / Self timer timing
ISO button setting button
Screen quality
selection button
Memory card slot cover
Monitor button
Zoom button
Card access lamp
Information button
Digital LCD panel
Image protect button
White balance button
Mirror up
button
Digital dial
AE lock
lock button
button
Mirror Lens removal
button
Metering
mode button
View
adjustment
knob
Focus mode Eye cup attachment /
switch lever removal lever
Eye piece shutter
Preview button
Lens attachment / removal guideline
3

Before you begin

1. Attach the provided strap on the hook (2 places) of the camera according to the
diagram.
2. Charge the provided battery.
Connect the power cord into the battery charger and then the power plug to the
outlet. The Power lamp will light.
Power lamp
When the battery is set in the battery charger as shown in the diagram, the charging
lamp will flash and the battery charging will start automatically.
When the charging lamp stops flashing and stays lit, charging is complete.
NOTE
The first charging session after purchase will be complete in approximately
2 hours.
Mamiya Digital Camera
User's Manual
4

Preparing the camera

1. Set the date and time of the camera.
Place the shutter release mode switch lever to S (Single-Frame
AE lock button / OK button
Mode) and move the selection key lock lever to the ON position.
Display the menu by pressing the menu button and select
Rear dial
[ ] (Set up menu) using the [ ] of the selection key
Selection key
and press [ ] on the selection key.
Selection key lock lever
1 Using the [
Menu button / Day mode/
night mode switch button
select the [9] "Set Date/Time" and
press the OK button.
Delete button
Support release point
S e t D a t e / T i m e
S e l e c t
2 The current time and date will be displayed. Press the OK
9 D a t e / T i m e
Shutter release mode
button to complete.
switch lever C u r r e n t 2 0 0 6 / 0 3 / 1 9 1 4 : 4 6
O K : S e t
Hot shoe Shutter release
button
Front dial
Exposure 3 Set the year using the [
9 D a t e / T i m e
correction button
Y e a r 2 0 0 6
M o n t h 3
D a t e 1 9
H o u r 1 4
M i n u t e 4 6
Auto bracket
mode button
O K
Exposure mode
4 Once the year is set, use the [
9 D a t e / T i m e
button
to set the month. Set the day/hour/minute accordingly. Press
Y e a r 2 0 0 6
LCD back light
M o n t h 3
the OK button to confirm the settings.
Upper LCD D a t e 1 9
button
H o u r 1 4
M i n u t e 4 6
O K
2. Insert the separately sold memory card.
Open the memory card slot cover of the camera and firmly insert the memory card as
shown in the diagram. Close the memory card slot cover.
Compact flash card
(CF card/MD: Micro drive) slot.
The SD memory card and the compact flash card (CF card/MD: Micro drive)
NOTE
can be used as memory cards. Use a memory card with a capacity of 256
MB or over.
3. Format the inserted memory card.
Display the menu by pressing the menu button and select [
using the [ ] of the selection key and press [
1 Using the [ ] of the selection key, select the [11] "Format" (card formatting)
and press the OK button.
2 Using the [ ] of the selection key, select the slot with the memory card
inserted (SD card or CF card) and press the OK button.
3 A message confirming formatting will be displayed. Press the OK button. Press
the cancel button in order to cancel formatting. Pressing the cancel button will
direct the screen to step 2.
Charging lamp
F o r m a t
S e l e c t
NOTE All images within the memory card will be deleted when formatted.
4. Remove the camera front cap and lens front/rear
caps.
The body front cap of the camera is removed by turning
the body front cap in the direction of the arrow while
pressing the lens removal button.
5. Attach the lens.
Match the lens attachment index and camera lens
attachment/removal index and turn until a clicking noise
is heard.
5

Taking a photograph

1. Place the shutter release mode switch lever to S (Single-Frame Mode) and move
the focus mode switch "S" (single focus) position.
Selection key lock lever
2. Turn the front dial (or rear dial) while pressing the
] of the selection key,
light adjustment mode button and set to "Average /
partial area automatic switching metering".
OK button
3. Turn the front dial while pressing the exposure
mode button and set to "P (program mode)".
] of the selection key.
] of the selection key in order
4. Turn the rear dial while pressing the Image quality selection
button and set the stored image quality to "RAW".
5. Turn the rear dial (or front dial) while pressing
the ISO button and set ISO reception to "50".
6. Turn the front dial while pressing the white balance
SD memory card slot
button and set to "AWB" (auto white balance).
] (Set up menu)
7. Hold the camera so that the subject is within the focus frame and press the
] on the selection key.
shutter release button halfway. Once the focus match mark is lit, fully press
the shutter release button and take the photograph.
6
Displaying and deleting images
(Displayed on the LC monitor)
Displaying images
1. Push the monitor button after taking the
1 1 F o r m a t 1 1 F o r m a t
photograph.
0 S l o t 1 S D 0 F o r m a t S D
1 S l o t 2 C F
The most recently photographed image will be
O K ?
displayed on the LC monitor.
Pressing the shutter release button will automatically
O K C a n c e l O K
return the camera setting to photography mode.
Deleting images
1. Push the monitor button.
The most recently photographed image will be displayed on the LC monitor.
2. Display the image to be deleted using the [
3. Push the delete button.
4. Using the [
the OK button. A message confirming image deletion will be displayed. Select
OK to perform deletion.
Lens removal button
NOTE
●
The reverse side illustrates how to develop the photographed images by
uploading the images onto the computer using the attached "Mamiya Digital
PhotoStudio" photo developing software.
●
Please read the following.
Lens attachment / removal guideline
Shutter release mode switch lever Focus mode switch lever
Front dial
Metering mode button
Upper LCD
Front dial
Upper LCD
Exposure mode button
Screen quality selection button Rear dial
Digital LCD panel
ISO button Rear dial
Digital LCD panel
Front dial
Digital LCD panel
White balance button
Monitor button Delete button
] of the selection key.
] of the selection key, select "1 frame" or "All images" and press
Deleted images cannot be displayed again.
Reverse side