Items In The Basic Menu - Sony XDS-1000 Operation Manual

Item group Function
Items Settings relating to control
100 to 199 panels
Items Settings relating to the remote
200 to 299 control interface
Items Settings relating to editing
300 to 399 operations
Items Settings relating to the
600 to 649 timecode generator

Items in the basic menu

The basic menu items (excluding the items related to the
operating hours meter) are listed in the following table.
• The values in the "Settings" column are the values that
appear in settings screens. The values in brackets [ ] are
Item number Item name
002 CHARACTER H-POSITION
003 CHARACTER V-POSITION
Refer to Item group
page 97 Items
650 to 699
page 99 Items
700 to 799
page 100 Items
800 to 899
page 101 Items
900 to 999
the value shown in menu screens (when they differ from
the values shown in settings screens).
• The underlined values are the factory defaults.
Settings
Adjust the horizontal screen position (as a hexadecimal value) of the text
information output from the HD-SDI OUTPUT1 2 (SUPER), SD-SDI
OUTPUT1 2 (SUPER), HD-SDI MONITOR/OUTPUT2 2 (SUPER), SD-SDI
MONITOR/OUTPUT2 2 (SUPER), or COMPOSITE OUTPUT MONI/2
connector for superimposed display on the monitor. The hexadecimal value
00 is for the far left of the screen. Increasing the value moves the position of
the characters to the right.
00 to 0C to 28 (When the number of system lines is 1080 and the
system frequency is 59.94i, 29.97P, 50i, 25P, or 23.98P)
00 to 0B to 28 (When the number of system lines is 720 and the system
frequency is 59.94P or 50P)
Set this item by adjusting to the required position while viewing the monitor.
Adjust the vertical screen position (as a hexadecimal value) of the text
information output from the HD-SDI OUTPUT1 2 (SUPER), SD-SDI
OUTPUT1 2 (SUPER), HD-SDI MONITOR/OUTPUT2 2 (SUPER), SD-SDI
MONITOR/OUTPUT2 2 (SUPER), or COMPOSITE OUTPUT MONI/2
connector for superimposed display on the monitor. The hexadecimal value
00 is for the top of the screen. Increasing the value lowers the position of the
characters.
00 to 2A to 32 (When the number of system lines is 1080 and the
system frequency is 59.94i, 29.97P, 50i, 25P, or 23.98P)
00 to 29 to 32 (When the number of system lines is 720 and the system
frequency is 59.94P or 50P)
Set this item by adjusting to the required position while viewing the monitor.
Function
Settings relating to the
metadata and UMID
Settings relating to video
control
Settings relating to audio
control
Settings relating to digital
processing
Refer to
page 102
page 103
page 106
page 107
91
Setup Menu