Wi-Fi access point. This will allow you to connect directly with your tablet or smart phone. 5. Select the Alecto-IVM-180 as your Wi-Fi router on your tablet or smart phone. This can be done in the confi guration settings for Wi-Fi connection. Enter the password: 12345678 6.
Page 3
STARTING THE IOS APP. Start the app. by clicking on the Start button. The following screen will appear. Press the button to get to the login details of the camera. Press the button to add a new camera. The same login screen will appear with blank fi...
Page 4
Set the new camera to pairing mode, and connect the camera to an electrical outlet. Ensure that the smart phone or tablet uses the same Wi-Fi connection as the camera (SSID Alecto-IVM-180). Start the app and follow the outline given in paragraph 2.1. When the procedure is fi nished, a second camera should appear in the camera list.
CAMERA OVERVIEW 1. Lens 6. Setting switch link/pairing 2. Sensor for IR LEDS 7. Power supply input 3. Microphone 8. LED indicator 4. Antenna 9. Reset button 5. Loudspeaker 10. Temperature sensor LED Indicator: - no connection Flashing green - ready as own Wi-Fi access point Green - connected to network Sensor for IR LEDS:...
Page 6
IOS APP CONTROLS We assume in this chapter that the app is running on your smart phone or tablet and that you are connected to the camera via your Wi-Fi network. OVERZICHT IOS APP. Press this button to talk through the camera. Your voice will be heard from the camera. (Only available when using an internal Wi-Fi network connection).
Page 7
Button to turn off the display. The other functions will continue to operate. Key to turn off receiving audio from the camera. The other functions will continue to operate. Button to adjust the speaker volume of the camera. Button to adjust the microphone sensitivity of the camera. Button to select and to play (baby) music through the camera.
Page 8
Setting the audio volume of the camera: The camera has a built-in speaker. This function can be used either to speak to the baby or to play baby music. The volume of the loud speaker in the camera can be set using this button.
Page 9
Talk back into the baby room: You can speak into the baby’s room by using the talkback button from either your smart phone or tablet. Your voice will come through the loud speaker located in the camera. Press the button. The icon will now change to icon .
Page 10
Recording and playback: You can record video images or pictures from the camera screen using the app. The video or still images will be recorded onto the hard drive of your smart phone or tablet. Making snapshot photos (picture): Press the button to take a snapshot of the screen.
Page 11
WiFi sends out when connected directly to your smart phone or tablet. The default name is “Alecto-IVM-180”. It may be helpful to change the name when using multiple cameras. You can change the password of the camera in this menu. This is to prevent any misuse of the images by others.
Page 12
Join Home AP: (only available when using an internal Wi-Fi network connection) When you open this menu all the Wi-Fi access points will appear on the screen. Choose your own Wi-Fi network and log in with the correct password for the network. Now change the camera from pairing mode to link mode using the switch located on the back of the camera.
HOW TO USE IN THE DARK The IVM-180 camera has built in infrared LEDs which illuminate the room for the camera when it is dark. The image on the screen will be colourless. The LEDs will automatically turn on when the room starts to get dark.
TIPS AND WARNINGS General: • Read the instruction manual carefully and follow all the instructions. • Do not place or use the camera in a wet place or damp environment. • Ensure proper ventilation for the heat; never cover the camera unit and/or the power adapter(s), and never place it directly next to a heat source.
fl ash depending on the lightness or darkness in the baby room. Increase or decrease the light to solve this problem. • If you still have no picture or sound, please contact the service department of Alecto at Telephone number: +31 (0) 73 6411 355.
SPECIFICATIONS Wireless: RF Frequency Range 2412MHz - 2462MHz (Channel 1~11) Standard WIFI 802.11b/g/n RF Power Output 11b: 21+/-1dBm/11Mbps; 11g: 18+/-1dBm/54Mbps; 11n: 17+/-1dBm/HT20 - 11n: 17+/-1dBm/HT40 RF Sensitivity 11b: -88dBm/11Mbps; 11g: -74dBm/54Mbps; 11n: -71dBm/MSC7/HT20 - 11n: -68dBm/MSC7/HT40 Transmission range (open fi eld) >= 80m Camera: Image Sensor...
Page 17
Power: Power adapter external DC 6V, 800mA Power LED bi-colour LED green/red Mode selection: Switch Mode Pairing to Access Point Router / Link to Access Point Router Antenna: Antenna type Dipole Antenna Operating Temperature: Operating temperature range 0 - 40 °C Operating humidity 40 - 90% RH Temperature sensor:...
TROUBLESHOOTING WIFI registration: Ensure that the switch on the back of the camera is set correctly. Switch on pairing to connect directly either a smart phone or tablet to the camera. Link the camera connection with your router or access point.
WHAT TO DO: If you notice a defect, fi rst consult the manual. If the manual does not give an answer, check the latest version of this manual on the internet at: www.alecto.info or www.hesdo-service.nl . You can also contact the supplier of the camera, or the Alecto customer service at: +31 (0) 73 6411 355.
Page 20
Service Help Hesdo Azielaan 12 5232BA s’-Hertogenbosch The Netherlands WWW.HESDO-SERVICE.NL INFO@HESDO-SERVICE.NL SERVICE@HESDO.DE NL +31 (0) 73 6411 355 FR +32 (0) 3 238 5666 DE +49 (0) 180 503 0085 Festnetz 0,14 €/Minute Handy bis zu 0,42/Minute V1.0...
Need help?
Do you have a question about the IVM-180 and is the answer not in the manual?
Questions and answers