Setting The Preset - Canon VB-M700F Operation Manual

Setting the Preset

A preset and home position can be set in one of the
following ways.
Setting from Camera Angle in the Image
Display Area
Select the preset you want to set from the [Preset/Home
1
Position] selection box, and then fill the [Preset Name]
field.
Click the [Obtain/release Camera Control] button to
2
obtain the control privileges of the camera.
Operate the camera from the image display area, set it
3
to the desired position and click [Quick Registration].
Use the preview frame of the panorama
screen to set presets
Use the preview frame of the panorama screen to set
presets.
Select the preset you want to set from the [Preset/Home
1
Position] selection box, and then fill the [Preset Name]
field.
Be sure to enter the preset name.
Click [Detailed Settings] and select the [Show in
2
viewers] checkbox.
Drag to move or resize the preset preview frame
3
(yellow) shown on the panorama screen to set the
preset.
If you click on the panorama screen, the preview
frame will move to center on the clicked point.
Click [Preview settings].
4
The settings are reflected in the image display area.
If you previewed incorrect settings, etc., and want to
restore the settings registered in the camera, click
[Restore settings].
Click [Save settings].
5
Specifying Detailed Settings
If you want to fine-tune the camera angle or to adjust the
image, etc., click [Detailed Settings] and specify the
detailed settings before saving the preset settings in the
camera.
Select the [Show in viewers] checkbox.
1
Click [Get camera info].
2
The camera parameters in the image display area are
loaded to [Detailed Settings].
Preset Setting Tool
6
6
-19